Abstract:Highlights • Replacing BisGMA/TEGDMA by PMGDM/PEGDMA increased composite WS/SL. • Increasing polymer hydrophilicity/permeability increased Ca 2+ release. • The increase was significant only at the highest DCPD and PMGDM/PEGDMA fractions. • In the first two weeks, Fickian diffusion was the predominant mechanism for most tested materials. • In the long term, Ca 2+ released occurred mostly due to relaxational diffusion. Objective To investigate the effect of hydrophilic/permeable polymer matrices on water sorption/solubility (WS/SL), Ca 2+ release, mechanical properties and hydrolytic degradation of composites containing dicalcium phosphate dihydrate (DCPD) particles. Methods Six composites were tested, all with 10 vol% of glass particles and either 30 vol% or 40 vol% DCPD. Composites containing 1BisGMA:1TEGDMA in mols (at both inorganic levels) were considered controls. Four materials were formulated where 0.25 or 0.5 of the BisGMA/TEGDMA was replaced by pyromellitic dianhydride glycerol dimethacrylate (PMGDM)/ polyethylene glycol dimethacrylate (PEGDMA). Composites were tested for degree of conversion (FTIR spectroscopy), WS/SL (ISO 4049) and Ca 2+ release (inductively coupled plasma optical emission spectroscopy). Fracture toughness (FT) and biaxial flexural strength/modulus (BFS/FM) were determined after 24 h and 60 days in water. The contributions of diffusional and relaxational mechanisms to Ca 2+ release kinetics were analyzed using the semi-empirical Salim-Peppas model. Data were analysed by ANOVA/Tukey test (alpha: 0.05). Results WS/SL was higher for composites containing PMGDM/PEGDMA compared to the controls (p < 0.001). Only at 40% DCPD the 0.5 PMGDM/PEGDMA composite showed statistically higher Ca 2+ release than the control. Relaxation diffusion was the main release mechanism. Initial FT was not negatively affected by matrix composition. BFS (both DCPD fractions) and FM (30% DCPD) were lower for composites with hydrophilic/permeable networks (p < 0.01). After 60 days in water, composites with PMGDM/PEGDMA presented significant reductions in FT, while all composites had reductions in BFS/FM. Significance Increasing matrix hydrophilicity/permeability significantly increased Ca 2+ release only at a high DCPD fraction.

Temperature, time, pressure, and CO 2 concentration dependence of rheological properties for poly(methyl methacrylate)/expanded graphite composites

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Effect of the Supercritical CO2 on Surface Structure of PMMA/PS Blend Thin Films

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

Influence of matrix composition on polymerization stress development of experimental composites

Unravelling the role of poly(methyl methacrylate) (PMMA) molecular weight in poly(vinylidene fluoride) (PVDF)/PMMA/Expanded graphite (ExGr) blend nanocomposites: Insights into morphology, thermal behavior, electrical conductivity, and wetting property

Effect of Supercritical Carbon Dioxide on the Crystallization Behavior of Poly(ether Ether Ketone)

Influences of Expanded Graphite on Structural Morphology and Thermal Performance of Composite Phase Change Materials Consisting of Fatty Acid Eutectics and Electrospun PA6 Nanofibrous Mats

Foaming Behavior of the Fluorinated Ethylene Propylene Copolymer Assisted with Supercritical Carbon Dioxide

Enhanced thermal conductivity of polyamide nanocomposites involving expanded graphite–carbon nanotube network structure using supercritical CO2

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Rheological, flame retardancy, and thermomechanical properties of polymethyl methacrylate composites: Effects of flame retardant and toughener

Estimation of the Effects of CO2 and Temperature on the Swelling of PS-CO2 Mixtures at Supercritical Conditions on Rheological Testing

Ion release mechanisms in composites containing CaP particles and hydrophilic monomers

Time-concentration Superpositioning Principle Accounting for the Reinforcement and Dissipation of High-Density Polyethylene Composites Melts

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Microstructure And Viscoelastic Behaviors Of Graphene/Pmma Nanocomposites

Thermodynamic behavior and crystal structure of polypropylene treated with supercritical carbon dioxide

Effects of Cooling Rate on the Crystallinity and Mechanical Properties of Thermoplastic Composites

Roles of modified polyethylene addition and electron beam treatment on the interfacial, thermal, mechanical, and electrical properties of polyethylene/short carbon fiber composites