Abstract:As an all-inorganic solid state lighting material, phosphor-in-glass (PiG) receives much attention in high-power white lighting. However, poor heat-dissipation performance and low color rendering index (Ra) caused by low doping concentration of phosphor limit its application in white laser diodes (wLDs). Herein, phosphor-in-glass films on sapphire (PiFS) with heat-conducting properties and high Ra were newly synthesized via screen printing technology, which is highly desired for high-power wLEDs/wLDs. The interfacial corrosion product of CaWO4 between nitride phosphor (CaAlSiN3:Eu2+) and borosilicate glass (BS-glass) was found and investigated in detail firstly to determine the sintering temperature. Laminated structure of PiFS with red layer inside and green layer outside was intentionally designed to effectively avoid 'reabsorption' effect between the red and green emitting phosphors. Compared with the opposite laminated structure, the PiFS exhibited the higher luminance efficiency (LE) and better optical properties (Ra=85, CCT=5362, CIE= (0.3348, 0.3156)) in wLDs. Notably, the adjustable optical characteristics can be achieved by changing the concentration of phosphor, the number of printing layers and the driving current for the application of PiFS in wLED and wLDs. High quality white light in wLED with CIE coordinates (0.3679, 0.3648) was also acquired and showed the excellent color rendering property (Ra = 90.8) and low color correlated temperature (CCT = 4280 K). Further, the working temperature of PiFS stabilized at 47 °C when applied in wLDs (1 W), which greatly prevented the phenomenon of 'thermal quenching' for the phosphors caused by high temperature under high power LDs. Thus, high Ra PiFS prepared by this strategy has better heat dissipation and optical properties than PiG, indicating a prospective application in high-power white LEDs/LDs.

Color tunable white LEDs based on low sintering temperature Phosphor−in−Glass

A low sintering temperature glass based on SiO2–P2O5–ZnO–B2O3–R2O system for white LEDs with high color rendering index

White light-emitting diodes using blue and yellow–orange-emitting phosphors

Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs

Chromaticity-tunable phosphor-in-glass for long-lifetime high-power warm w-LEDs

Color-filtered Phosphor-in-glass for LED-lit LCD with Wide Color Gamut

(Sr,Ca)AlSiN3:Eu2+ phosphor-in-glass and YAG ceramic composites for high CRI and high-power white LEDs

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix

Development of high luminous efficacy red-emitting phosphor-in-glass for high-power LED lighting systems using our original low Tg and Ts glass

A novel Eu3+-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix

Chromaticity-tunable color converter of CaAlSiN3:Eu2+ red phosphor film layer stacked YAG PiG for warm-WLED

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

Spectroscopic Properties of Eu-doped Oxynitride Glass–ceramics for White Light LEDs

Improved optical properties of phosphors-in-glass through the optimal size distribution of glass powder

Thermal reduction-triggered full-color tuning of Eu3+/Eu2+/Tb3+ co-doped sintered nanoporous Al2O3-SiO2 glass for WLEDs

A novel borosilicate glass based PiGs for WLEDs with tunable interface defects and high anti-thermal quenching power

Phosphor in glass composited with CsPb(BrI)3 perovskite nanocrystals embedded glass for high CRI WLED application

All‐Inorganic Functional Phosphor–Glass Composites by Light Curing Induced 3D Printing for Next‐Generation Modular Lighting Devices

Color Tunable Composite Phosphor Ceramics Based on SrAlSiN3:Eu2+/Lu3Al5O12:Ce3+ for High-Power and High-Color-Rendering-Index White LEDs/LDs Lighting

High-efficiency Technology of LED White Light Based on Phosphor Glass

Laminated Structure of Phosphor-in-Glass Films on Sapphire with High Color Rendering Index and Heat-Conducting Properties for High-Power White LEDs/LDs