Abstract:An innovative phosphor‐in‐glass (PiG) film architecture is introduced, aiming to achieve superior quality laser‐driven light, where the traditional PiG film is topped with a Al2O3‐in‐glass film (AiG film). The heat dissipation performance and light uniformity of PiG film are enhanced due to the AiG film, enabling improved luminance and color quality. Laser‐driven white light exhibits exceptional brightness and directionality, making it particularly well‐suited for spotlight applications. Yet, attaining high‐quality white light remains challenging due to the sluggish heat dispersion and inconsistent light uniformity of color converters. In this study, an innovative phosphor‐in‐glass (PiG) film architecture is introduced, aiming to achieve superior quality laser‐driven light, where the traditional Y3(Ga,Al)5O12:Ce3+ (YAGG:Ce3+) PiG film is topped with a Al2O3‐in‐glass (AiG) film. The heightened thermal conductivity of the AiG film facilitates quicker dissipation of heat, consequently elevating the luminescence saturation threshold from 14 to 16 W mm−2 and luminous flux from 1243.8 to 1475.9 lm. The increased light scattering attributed to the AiG film also effectively disperses both laser and emitted light, significantly enhancing the angular consistency of color rendering index (Ra). This improvement is evident as the coefficient of variation (Cv) decreases dramatically from 16.69% to 0.25%. Moreover, by integrating CaAlSiN3:Eu2+ (CASN:Eu2+) into the PiG film and fine‐tuning the YAGG:Ce3+ and CASN:Eu2+ ratio, a high‐quality laser‐driven white light achieving an impressive color rendering index (Ra) of 88.7 and offering an adjustable correlated color temperature (CCT) has been developed. This innovation holds tremendous potential as a versatile spotlight solution for both indoor and outdoor settings.

(Sr,Ca)AlSiN3:Eu2+ phosphor-in-glass and YAG ceramic composites for high CRI and high-power white LEDs

Ca(La1-xEux)4Si3O13 red emitting phosphor for white light emitting diodes

Color Tunable Composite Phosphor Ceramics Based on SrAlSiN3:Eu2+/Lu3Al5O12:Ce3+ for High-Power and High-Color-Rendering-Index White LEDs/LDs Lighting

Chromaticity-tunable color converter of CaAlSiN3:Eu2+ red phosphor film layer stacked YAG PiG for warm-WLED

Color tunable white LEDs based on low sintering temperature Phosphor−in−Glass

Development of high luminous efficacy red-emitting phosphor-in-glass for high-power LED lighting systems using our original low Tg and Ts glass

Highly crystalline Y3Al5O12:Ce3+ phosphor-in-silica glass ceramics for high-power solid-state lighting

(Sr, Ca)AlSiN3:Eu2+ Phosphor-Doped YAG:Ce3+ Transparent Ceramics as Novel Green-Light-Emitting Materials for White LEDs

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

A novel borosilicate glass based PiGs for WLEDs with tunable interface defects and high anti-thermal quenching power

Synthesis, structure and photoluminescence properties of (Sr,Ca)AlSiN3:Eu2+ phosphor for white light emitting diodes with controllable optical performance

A novel Eu3+-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix

An orange-yellow-emitting Lu<sub>2-<i>x</i></sub>Mg<sub>2</sub>Al<sub>2-<i>y</i></sub>Ga<sub><i>y< /i></sub>Si<sub>2</sub>O<sub>12</sub>:<i>x</i>Ce<SUP>3+</SUP> phosphor-in-glass film for laser-driven white light

Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs

Innovative Architecture for Phosphor‐in‐Glass Films Enabling Superior Luminance and Color Quality Laser‐Driven White Light

Facile Preparation and Optical Properties of Te/Pb-free Y3Al5O12:Ce3+ Phosphor-in-glass Via a Screen-Printing Route for High-Power WLEDs

Laminated composite of ceramic/glass films to realize high luminous efficiency and high color quality in laser-driven white lighting

Chromaticity-tunable phosphor-in-glass for long-lifetime high-power warm w-LEDs

Improved optical properties of phosphors-in-glass through the optimal size distribution of glass powder

Highly thermal conductive red-emitting AlN-CaAlSiN3:Eu2+ composite phosphor ceramics for high-power laser-driven lighting

Nitride phosphor-in-glass films enabling high-performance white light in transmissive and reflective laser lighting