Abstract:As an all-inorganic solid state lighting material, phosphor-in-glass (PiG) receives much attention in high-power white lighting. However, poor heat-dissipation performance and low color rendering index (Ra) caused by low doping concentration of phosphor limit its application in white laser diodes (wLDs). Herein, phosphor-in-glass films on sapphire (PiFS) with heat-conducting properties and high Ra were newly synthesized via screen printing technology, which is highly desired for high-power wLEDs/wLDs. The interfacial corrosion product of CaWO4 between nitride phosphor (CaAlSiN3:Eu2+) and borosilicate glass (BS-glass) was found and investigated in detail firstly to determine the sintering temperature. Laminated structure of PiFS with red layer inside and green layer outside was intentionally designed to effectively avoid 'reabsorption' effect between the red and green emitting phosphors. Compared with the opposite laminated structure, the PiFS exhibited the higher luminance efficiency (LE) and better optical properties (Ra=85, CCT=5362, CIE= (0.3348, 0.3156)) in wLDs. Notably, the adjustable optical characteristics can be achieved by changing the concentration of phosphor, the number of printing layers and the driving current for the application of PiFS in wLED and wLDs. High quality white light in wLED with CIE coordinates (0.3679, 0.3648) was also acquired and showed the excellent color rendering property (Ra = 90.8) and low color correlated temperature (CCT = 4280 K). Further, the working temperature of PiFS stabilized at 47 °C when applied in wLDs (1 W), which greatly prevented the phenomenon of 'thermal quenching' for the phosphors caused by high temperature under high power LDs. Thus, high Ra PiFS prepared by this strategy has better heat dissipation and optical properties than PiG, indicating a prospective application in high-power white LEDs/LDs.

Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs

Color tunable white LEDs based on low sintering temperature Phosphor−in−Glass

Improved optical properties of phosphors-in-glass through the optimal size distribution of glass powder

An orange-yellow-emitting Lu<sub>2-<i>x</i></sub>Mg<sub>2</sub>Al<sub>2-<i>y</i></sub>Ga<sub><i>y< /i></sub>Si<sub>2</sub>O<sub>12</sub>:<i>x</i>Ce<SUP>3+</SUP> phosphor-in-glass film for laser-driven white light

Study of efficient sustainable phosphor in glass (P – i – G) material for white LED applications fabricated by tape casting and screen-printing techniques

Highly Crystalline Y3Al5O12:Ce3+ Phosphor‐in‐Glass Film: A New Composite Color Converter for Next‐Generation High‐Brightness Laser‐Driven Lightings

Reducing the cyan-cavity: Lu2MAl4SiO12:Ce3+ (M = Mg, Ca, Sr and Ba) phosphor-in-glass film towards full-spectrum laser-driven lighting

Color Tunable Composite Phosphor Ceramics Based on SrAlSiN3:Eu2+/Lu3Al5O12:Ce3+ for High-Power and High-Color-Rendering-Index White LEDs/LDs Lighting

A low sintering temperature glass based on SiO2–P2O5–ZnO–B2O3–R2O system for white LEDs with high color rendering index

Laminated Structure of Phosphor-in-Glass Films on Sapphire with High Color Rendering Index and Heat-Conducting Properties for High-Power White LEDs/LDs

Facile Preparation and Optical Properties of Te/Pb-free Y3Al5O12:Ce3+ Phosphor-in-glass Via a Screen-Printing Route for High-Power WLEDs

A novel Eu3+-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix

Color-filtered Phosphor-in-glass for LED-lit LCD with Wide Color Gamut

(Sr,Ca)AlSiN3:Eu2+ phosphor-in-glass and YAG ceramic composites for high CRI and high-power white LEDs

Highly crystalline Y3Al5O12:Ce3+ phosphor-in-silica glass ceramics for high-power solid-state lighting

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

Innovative Architecture for Phosphor‐in‐Glass Films Enabling Superior Luminance and Color Quality Laser‐Driven White Light

Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix

Cost-effective way of improving the optical properties of phosphor-in-glass by adjusting the particle size of glass powder

Laminated composite of ceramic/glass films to realize high luminous efficiency and high color quality in laser-driven white lighting

High‐Efficiency Cyan–Green‐Emitting Y3Sc2Ga3O12:Ce Phosphor for Microcrystals and Ultrathin Phosphor‐Glass Composite for Light‐Emitting Diode