Abstract:As an all-inorganic solid state lighting material, phosphor-in-glass (PiG) receives much attention in high-power white lighting. However, poor heat-dissipation performance and low color rendering index (Ra) caused by low doping concentration of phosphor limit its application in white laser diodes (wLDs). Herein, phosphor-in-glass films on sapphire (PiFS) with heat-conducting properties and high Ra were newly synthesized via screen printing technology, which is highly desired for high-power wLEDs/wLDs. The interfacial corrosion product of CaWO4 between nitride phosphor (CaAlSiN3:Eu2+) and borosilicate glass (BS-glass) was found and investigated in detail firstly to determine the sintering temperature. Laminated structure of PiFS with red layer inside and green layer outside was intentionally designed to effectively avoid 'reabsorption' effect between the red and green emitting phosphors. Compared with the opposite laminated structure, the PiFS exhibited the higher luminance efficiency (LE) and better optical properties (Ra=85, CCT=5362, CIE= (0.3348, 0.3156)) in wLDs. Notably, the adjustable optical characteristics can be achieved by changing the concentration of phosphor, the number of printing layers and the driving current for the application of PiFS in wLED and wLDs. High quality white light in wLED with CIE coordinates (0.3679, 0.3648) was also acquired and showed the excellent color rendering property (Ra = 90.8) and low color correlated temperature (CCT = 4280 K). Further, the working temperature of PiFS stabilized at 47 °C when applied in wLDs (1 W), which greatly prevented the phenomenon of 'thermal quenching' for the phosphors caused by high temperature under high power LDs. Thus, high Ra PiFS prepared by this strategy has better heat dissipation and optical properties than PiG, indicating a prospective application in high-power white LEDs/LDs.

Laminated Structure of Phosphor-in-Glass Films on Sapphire with High Color Rendering Index and Heat-Conducting Properties for High-Power White LEDs/LDs

Unique sandwich design of high-efficiency heat-conducting phosphor-in-glass film for high-quality laser-driven white lighting

Reducing the cyan-cavity: Lu2MAl4SiO12:Ce3+ (M = Mg, Ca, Sr and Ba) phosphor-in-glass film towards full-spectrum laser-driven lighting

Broad-Band and Stable Phosphor-in-Glass Enabling Ultrahigh Color Rendering for All-Inorganic High-Power WLEDs

Innovative Architecture for Phosphor‐in‐Glass Films Enabling Superior Luminance and Color Quality Laser‐Driven White Light

Unique sandwich and microstructure design of phosphor-in-glass film for high brightness laser-driven white lighting

Realization of phosphor-in-glass thin film on soda-lime silicate glass with low sintering temperature for high color rendering white LEDs

An orange-yellow-emitting Lu<sub>2-<i>x</i></sub>Mg<sub>2</sub>Al<sub>2-<i>y</i></sub>Ga<sub><i>y< /i></sub>Si<sub>2</sub>O<sub>12</sub>:<i>x</i>Ce<SUP>3+</SUP> phosphor-in-glass film for laser-driven white light

A novel Eu3+-doped phosphor-in-glass for WLEDs and the effect of borophosphate matrix

Reliable and Efficient Phosphor-in-Glass-Based Chip-Scale Packaging for High-Power White LEDs

High CRI white light-emitting phosphor-in-glass film for laser lighting applications by adding cyan phosphor BaSi2O2N2:Eu2+

Chromaticity-tunable phosphor-in-glass for long-lifetime high-power warm w-LEDs

Β‐sialon:Eu2+ Phosphor‐in‐Glass Film: an Efficient Laser‐Driven Color Converter for High‐Brightness Wide‐Color‐Gamut Projection Displays

Five-Surface Phosphor-in-Glass for Enhanced Illumination and Superior Color Uniformity in Large-View Scale LEDs

Highly efficient and thermally robust cyan-green phosphor-in-glass films for high-brightness laser lighting

Laminated composite of ceramic/glass films to realize high luminous efficiency and high color quality in laser-driven white lighting

Microstructured interface modification of laser-driven phosphor-in-glass-film for ultra-high-efficiency white lighting

Toward High‐Quality Laser‐Driven Lightings: Chromaticity‐Tunable Phosphor‐in‐Glass Film with “Phosphor Pattern” Design

Narrow-Band Green-Emissive -SiAlON:Eu<SUP>2+</SUP> Phosphor-in-Glass Film for Laser Display Applications

All-inorganic Color Converter Based on Phosphor in Bismuthate Glass for White Laser Diodes Lighting

Glass-ceramic Phosphors for Solid State Lighting: A Review