Abstract:Significant increases in the energy density of batteries must be achieved by exploring new materials and cell configurations. Lithium metal and lithiated silicon are two promising high-capacity anode materials. Unfortunately, both of these anodes require a reliable passivating layer to survive the serious environmental corrosion during handling and cycling. Here we developed a surface fluorination process to form a homogeneous and dense LiF coating on reactive anode materials, with in situ generated fluorine gas, by using a fluoropolymer, CYTOP, as the precursor. The process is effectively a "reaction in the beaker", avoiding direct handling of highly toxic fluorine gas. For lithium metal, this LiF coating serves as a chemically stable and mechanically strong interphase, which minimizes the corrosion reaction with carbonate electrolytes and suppresses dendrite formation, enabling dendrite-free and stable cycling over 300 cycles with current densities up to 5 mA/cm2. Lithiated silicon can serve as either a pre-lithiation additive for existing lithium-ion batteries or a replacement for lithium metal in Li-O2 and Li-S batteries. However, lithiated silicon reacts vigorously with the standard slurry solvent N-methyl-2-pyrrolidinone (NMP), indicating it is not compatible with the real battery fabrication process. With the protection of crystalline and dense LiF coating, LixSi can be processed in anhydrous NMP with a high capacity of 2504 mAh/g. With low solubility of LiF in water, this protection layer also allows LixSi to be stable in humid air (∼40% relative humidity). Therefore, this facile surface fluorination process brings huge benefit to both the existing lithium-ion batteries and next-generation lithium metal batteries.

Improvement of the electrochemical properties of Li/CFx primary batteries induced by Nitrogen plasma treatment from silica and carbon fluoride

Surface De-Fluorination and Bond Modification of CFx by High-Density Hydrogen Plasma Processing

Air Plasma-Induced Carbon Fluoride Enabling Active C-F Bonds for Double-High Energy/Power Densities of Li/CF X Primary Battery

Plasma-enhanced fluorination of multi-walled carbon nanotubes for CF<sub>x</sub> cathode materials with ultrahigh electrochemical performance

Air plasma-induced carbon fluoride enabling active C F bonds for double-high energy/power densities of Li/CFx primary battery

Enhanced Electrochemical Activity of Rechargeable Carbon Fluorides–sodium Battery with Catalysts

Enhanced electrochemical performance of N, F co-doped and etched needle coke-based lithium-ion battery anode materials by NF 3 plasma treatment

Modifying CF0.75 Cathode by Ultrathin Carbon Layer to Boosts Electrons Transmission and Discharge Capacity for Lithium/fluorinated Graphite Primary Batteries

Plasma-enhanced Fluorination of Layered Carbon Precursors for High-Performance CFx Cathode Materials

Ultrafast Nano-Silver Modified Fluorinated Carbon Nanotubes Cathode Enables Advanced Lithium/Sodium/Potassium Primary Batteries

Improving the Electrochemical Performance of Fluorinated Carbons by Solvent Co–Intercalation for Rechargeable Na–Ion Battery Cathodes

Integrated Polyaniline-Coated Cfx Cathode Materials with Enhanced Electrochemical Capabilities for Li/Cfx Primary Battery

Solvation Structure Tuning Induces LiF/Li3N‐Rich CEI and SEI Interfaces for Superior Li/CFx Batteries

Role Of Fluorine Surface Modification In Improving Electrochemical Cyclability Of Concentration Gradient Li[Ni0.73co0.12mn0.15]O-2 Cathode Material For Li-Ion Batteries

Study on the thermal effect in ultra-fast plasma-enhanced fluorination for high-quality CFx cathode materials

A novel one-step method to prepare N, S Co-doped sub-fluorinated carbon electrode materials for ultrahigh-rate lithium-fluorinated carbon battery

Fluorides coated Ni-rich cathode materials with enhanced surficial chemical stability for advanced lithium-ion battery

Electrochemical Conversion of Nitrogen Trifluoride as a Gas-to-Solid Cathode in Li Batteries

Insights into surface-modified Li(Ni0.80Co0.15Al0.05)O2 cathode by atomic layer fluorination for improved cycling behaviour

Constructing the Charge Channel with CFx Using a Well-Dispersed Carbon Nanotube Arrays to Boost High-Rate Primary Battery

Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability.