Abstract:The accharin sodium (NaSH)‐coupled fluoroethylene carbonate (FEC) induced a protective interface layer, cathode‐electrolyte interface (CEI) on the LiCoO2 and solid electrolyte interface (SEI) on the Li‐metal anode, significantly safeguards electrode materials, suppresses lithium dendrite growth, and enhances Li+ ions transport dynamics during high‐voltage cycling. LiCoO2ǁLi batteries containing fluorinated solvent‐based electrolyte with NaSH (FBE+NaSH) deliver excellent stability over 530 cycles within the range of 2.8–4.45 V with a high capacity retention of 80%. Optimizing the electrode/electrolyte interface structure is the key to realizing high‐voltage Li‐metal batteries (LMBs). Herein, a functional electrolyte is introduced to synergetically regulate the interface layer structures on the high‐voltage cathode and the Li‐metal anode. Saccharin sodium (NaSH) as a multifunctional electrolyte additive is employed in fluorinated solvent‐based electrolyte (FBE) for robust interphase layer construction. On the one hand, combining the results of ex‐situ techniques and in‐situ electrochemical dissipative quartz crystal microbalance (EQCM‐D) technique, it can be seen that the solid electrolyte interface (SEI) layer constructed by NaSH‐coupled fluoroethylene carbonate (FEC) on Li‐metal anode significantly inhibits the growth of lithium dendrites and improves the cyclic stability of the anode. On the other hand, the experimental results also confirm that the cathode‐electrolyte interface (CEI) layer induced by NaSH‐coupled FEC effectively protects the active materials of LiCoO2 and improves their structural stability under high‐voltage cycling, thus avoiding the material rupture. Moreover, theoretical calculation results show that the addition of NaSH alters the desolvation behavior of Li+ and enhances the transport kinetics of Li+ at the electrode/electrolyte interface. In this contribution, the LiCoO2ǁLi full cell containing FBE+NaSH results in a high capacity retention of 80% after 530 cycles with a coulombic efficiency of 99.8%.

Solvation Structure Tuning Induces LiF/Li3N‐Rich CEI and SEI Interfaces for Superior Li/CFx Batteries

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

The Synergistic Effect of Lithium Bis(fluorosulfonyl)imide and Lithium Nitrate for High-Performance Lithium Metal Anode

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

A Novel 4‐Fluorophenyl Isocyanate Additive Constructing Solid Cathodes‐Electrolyte Interface for High‐Performance Lithium‐Ion Batteries

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Enhancing Li cycling coulombic efficiency while mitigating "shuttle effect" of Li−S battery through sustained release of LiNO 3

Tri-anion solvation structure electrolyte improves the electrochemical performance of Li||LiNi0.8Co0.1Mn0.1O2 batteries

Anion-Dominated Solvation in Low-Concentration Electrolytes Promotes Inorganic-Rich Interphase Formation in Lithium Metal Batteries

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Pentafluoropyridine additive induced SEI film regulation and remarkable performance improvement of the lithium primary batteries

Regulating the Electrode-Electrolyte Interfaces of Lithium-High Nickel Batteries via a Multifunctional Additive

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Guided Lithium Metal Deposition and Improved Lithium Coulombic Efficiency through Synergistic Effects of LiAsF6 and Cyclic Carbonate Additives

Multifunctional Additives to Realize Dendrite‐Free Lithium Deposition in Carbonate Electrolytes toward Low‐Temperature Li Metal Batteries

Saccharin Sodium Coupling Fluorinated Solvent Enabled Stable Interface for High‐Voltage Li‐Metal Batteries

LiF-Rich Electrode-Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries

BF 3 -based Electrolyte Additives Promote Electrochemical Reactions to Boost the Energy Density of Li/CF x Primary Batteries

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Perfluorinated Amines: Accelerating Lithium Electrodeposition by Tailoring Interfacial Structure and Modulated Solvation for High-Performance Batteries

Additives strategies to improving cycling stability of Li metal batteries by modifying electrode electrolyte interphases