Abstract:At present, it is still a challenge to prepare multifunctional composite nanomaterials with simple composition and favorable structure. Here, multifunctional Fe3O4@nitrogen-doped carbon (N-C) nanocomposites with hollow porous core-shell structure and significant electrochemical, adsorption and sensing performances were successfully synthesized through the hydrothermal method, polymer coating, then thermal annealing process in nitrogen (N2) and lastly etching in hydrochloric acid (HCl). The morphologies and properties of the as-obtained Fe3O4@N-C nanocomposites were markedly affected by the etching time of HCl. When the Fe3O4@N-C nanocomposites after etching for 30 min (Fe3O4@N-C-3) were applied as the anodes for lithium-ion batteries (LIBs), the invertible capacity could reach 1772 mA h g-1 after 100 cycles at the current density of 0.2 A g-1, which is much better than that of Fe3O4@N-C nanocomposites etched, respectively, for 15 min and 45 min (948 mA h g-1 and 1127 mA h g-1). Additionally, the hollow porous Fe3O4@N-C-3 nanocomposites also exhibited superior rate capacity (950 mA h g-1 at 0.6 A g-1). The excellent electrochemical properties of Fe3O4@N-C nanocomposites are attributed to their distinctive hollow porous core-shell structure and appropriate N-doped carbon coating, which could provide high-efficiency transmission channels for ions/electrons, improve the structural stability and accommodate the volume variation in the repeated Li insertion/extraction procedure. In addition, the Fe3O4@N-C nanocomposites etched by HCl for different lengths of time, especially Fe3O4@N-C-3 nanocomposites, also show good performance as adsorbents for the removal of the organic dye (methyl orange, MO) and surface-enhanced Raman scattering (SERS) substrates for the determination of a pesticide (thiram). This work provides reference for the design and preparation of multifunctional materials with peculiar pore structure and uncomplicated composition.

Enhanced electrochemical performance of N, F co-doped and etched needle coke-based lithium-ion battery anode materials by NF 3 plasma treatment

Morphologically and chemically regulated 3D carbon for Dendrite-free lithium metal anodes by a plasma processing

Multifunctional Hollow Porous Fe3O4@N-C Nanocomposites as Anodes of Lithium-Ion Battery, Adsorbents and Surface-Enhanced Raman Scattering Substrates

Improvement of the electrochemical properties of Li/CFx primary batteries induced by Nitrogen plasma treatment from silica and carbon fluoride

Nitrogen-plasma Doping of Carbon Film for a High-Quality Layered Si/C Composite Anode.

Rational Synthesis of Spongy Fe3N@N-Doped Carbon Nanorods with Controlled Topography and Porosity for Enhanced Energy Storage Anodes in Lithium-Ion Batteries

Boosting Lithium/sodium Ion Storage by Synergistic Effect Between Nanostructured Fe4N-Fe3C and 3D Interconnected Graphitic C3N4

Microstructure and lithium storage properties of Fe2O3 in N-doped carbon nanosheets

A high performance lithium metal anode enabled by CF 4 plasma treated carbon paper

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Plasma Enabled Fe2O3/Fe3O4 Nano-aggregates Anchored on Nitrogen-doped Graphene as Anode for Sodium-Ion Batteries

Improved discharge capacities for lithium-ion batteries containing needle cokes doped with oxygen via ozonation

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Redox-Driven Lithium Perfusion to Fabricate Li@Ni-Foam Composites for High Lithium-Loading 3D Anodes

Nitrogen-doped porous hard carbons derived from shaddock peel for high-capacity lithium-ion battery anodes

Correlation Between Atomic Structure and Electrochemical Performance of Anodes Made from Electrospun Carbon Nanofiber Films

Enhanced Lithium Storage Capability in Li-Ion Batteries Using Porous 3d Co3o4 Nanofiber Anodes

Gradient electrospinning and controlled pyrolysis derived Fe O @N-doped carbon nanorods towards enhanced lithium storage

Facile synthesis of FeCO3/nitrogen-doped carbon dot composites for lithium-ion battery anodes

Cr/S co-doped carbon nanofibers via electrospinning for high-performance Li/Na ion batteries

Co3O4/nitrogen-doped carbon nanoparticles for high-performance Li/Na-ion batteries