Abstract:Layered nickel-rich cathodes generally suffer from their unstable surface because of lithium impurities. Thus, building an interface with both high electrochemical stability and electroactivity is essential for the development of cathodes. In this work, a Li0.73Co1–xAlxO2 thin layer was successfully coated on pristine LiNi0.8Co0.15Al0.05O2 (NCA) spheres by the reaction of the surface residual lithium with cobalt oxalate nanomaterials. Then, the surface chemical states of NCA were effectively modulated by Li0.73Co1–xAlxO2 coating, including less surface lithium impurities, lower resistance, enhanced ion conductivity, and cycling stability. As a potential cathode material with a higher oxidation potential than that of NCA, Li0.73Co1–xAlxO2 coating plays both roles of an isolation layer and active layer. The advances of Li0.73Co1–xAlxO2 coating may be related to the enhanced covalence property of the Co–O bond and the coexistence of Co4+ and Al3+, which can help to form a stable cathode–electrolyte interface and boost the ion diffusion of the coated NCA cathode. This Li0.73Co1–xAlxO2-modified NCA cathode exhibits a highly competitive performance, such as a capacity of 215.2 mA h g–1 at the initial cycle (0.1 C) and a retention rate of 62.7% after 200 cycles at 5 C. This surface chemical state modulation strategy provides a new possibility of surface engineering with nickel-rich cathodes for high-energy Li-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05229?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05229</a>.XRD pattern and SEM image of the precursor; Raman spectra of NCA, , and ; HRTEM of pristine NCA; XRD patterns and structure parameters of 1.0 wt % Li0.73Co1–xAlxO2-coated NCA (annealing temperature at 500, 600, and 700 °C); cycling performances of pristine and all experimental samples; full battery cycling test of NCA, , and ; discharge curves of NCA, , and ; XRD patterns of NCA, , and after 200 cycles; experimental design of this work; and calculated relative area of the XPS peaks of NCA, , and (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05229/suppl_file/sc0c05229_si_001.pdf">PDF</a>).This article has not yet been cited by other publications.

Insights into surface-modified Li(Ni0.80Co0.15Al0.05)O2 cathode by atomic layer fluorination for improved cycling behaviour

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Role Of Fluorine Surface Modification In Improving Electrochemical Cyclability Of Concentration Gradient Li[Ni0.73co0.12mn0.15]O-2 Cathode Material For Li-Ion Batteries

Fluorine Doping and Al2O3 Coating Co-modified Li[Li0.20Ni0.133Co0.133Mn0.534]O2 As High Performance Cathode Material for Lithium-Ion Batteries

Surface Modification of Li(Ni0.6Co0.2Mn0.2)O2 Cathode Materials by Nano-Al2O3 to Improve Electrochemical Performance in Lithium-Ion Batteries

Reduction of Surface Residual Lithium Compounds for Single-Crystal LiNi0.6Mn0.2Co0.2O2 Via Al2O3 Atomic Layer Deposition and Post-Annealing

Effect of surface alkalinity reduction on cycling and rate performance of LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries

(Digital Presentation) Simultaneous Transforming Residual Lithium Compounds and Stabilizing Surface Lattice Oxygen for Ni-Rich Cathode Via Atomic Layer Deposition and Post-Annealing

Enhanced Cycling of Ni-Rich Positive Electrodes by Fluorine Modification

One-step bulk and surface co-modification of LiNi0.8Co0.15Al0.05O2 cathode material towards excellent long-term cyclability

Insights on the Activation and Stabilization of NCA Cathode Interface: Surface Chemical State Modulations of Aluminum-Mediated Li 0.73 CoO 2 Coatings

Simple Solid-State Method for Synthesis of Li[Li 0.20 Mn 0.534 Ni 0.133 Co 0.133 ]O 2 Cathode Material with Improved Electrochemical Performance in Lithium-Ion Batteries

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Atomic Layer Deposited Fluoride Coatings for Li-Ion Battery Cathodes

Stabilizing the Oxygen Ions and Alleviating the Surface Structure Evolution of Li-Excess Layered Cathode for Advanced Lithium-Ion Batteries

Boosting cyclability performance of the LiNi0.8Co0.15Al0.05O2 cathode by a polyacrylonitrile-induced conductive carbon surface coating

High Performance All-Solid-State Batteries with a Ni-Rich NCM Cathode Coated by Atomic Layer Deposition and Lithium Thiophosphate Solid Electrolyte

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

New Chemical Insights into the Beneficial Role of Al2O3 Cathode Coatings in Lithium-ion Cells

Understanding the Role of NH4F and Al2O3 Surface Co-modification on Lithium-Excess Layered Oxide Li1.2Ni0.2Mn0.6O2

Stabilizing the surface of LiNi0.815Co0.15Al0.035O2 by a facile pre-oxidation-coating strategy on the precursor