Abstract:The processes of cathodic reduction of U(III) ions to metal in a low–melting LiCl–KCl–CsCl eutectic at the temperature range 650–850 K on tungsten, gallium and cadmium electrodes in an inert gas atmosphere have been studied by non-stationary and stationary electrochemical methods. Reagents without contain impurities of moisture, oxygen and their compounds were used in the experiments. All major operations were performed in a dry glove box. The following methods were used to analyze the electrochemical processes: cyclic voltammetry, square-wave voltammetry and potentiometry at zero current. On cyclic voltammogram of the molten LiCl–KCl–CsCl–UCl3 solution on an inert tungsten electrode, one cathode current peak corresponding to the deposition of metallic uranium and one anode current peak associated with its dissolution were recorded. It was found that the potential of the cathode peak was shifted to a region of more negative values with an increase of the scan rate. The value of the cathode peak current was directly proportional vs. the square root of the polarization rate, but this dependence does not pass through the origin. Consequently, the system of U(III)/U(0) couple was irreversible and proceeds in one stage. It was found that on square-wave voltammograms in the studied “electrochemical window” the deposition of uranium on liquid reactive gallium and cadmium electrodes was carried out at more positive values than on inert tungsten electrode. It was established that this potential shift was associated with the formation of intermetallic compounds of uranium with the material of reactive electrodes. The values of the alloy formation potentials were determined. For identification of the composition of cathode deposits, potentiostatic electrolysis was performed. By X–ray diffraction analysis, it was found that the formation of the intermetallic compounds Ga3U and Ga2U occurs on the gallium reactive electrode, and Cd11U occurs on the cadmium one. The conditions of their formation during the electrolysis of molten LiCl–KCl–CsCl–UCl3 solutions were established. The reaction of the electrochemical extraction of uranium from molten LiCl–KCl–CsCl–UCl3 electrolyte was investigated on liquid reactive electrodes at different duration of electrolysis. It was found that the electrochemical extraction of uranium exceeds 97% on both Ga and Cd electrodes.

Application of Binary Ga–Al Alloy Cathode in U Separation from Ce: The Possibility in Pyroprocessing of Spent Nuclear Fuel

Liquid Electrodes for An/Ln Separation in Pyroprocessing

Accelerated Separation of Uranium from Lanthanides (La, Ce, Sm) in LiCl-KCl Eutectic by Porous Aluminum Electrodes

Electroseparation of uranium from lanthanides (La, Ce, Pr, Nd and Sm) on liquid gallium electrode

Electrodeposition Mechanism of La3+ on Al, Ga and Al-Ga Alloy Cathodes in LiCl-KCl Eutectic Salt

Electrodeposition Mechanism of La 3+ on Al, Ga and Al-Ga Alloy Cathodes in LiCl-KCl Eutectic Salt

Application of liquid Ga-Pb cathode for selective separation of samarium fission products from molten alkali metal chlorides

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Electrochemical Drawdown of U 3+ and Ce 3+ in Molten LiCl-KCl Using a Liquid Cadmium Cathode

Cathode processes and uranium electrochemical extraction on W and Ga electrodes in LiCl–KCl melt

ELECTROCHEMICAL SYNTHESIS OF INTERMETALLIC U–Ga AND U–Cd COMPOUNDS IN MOLTEN LiCl–KCl–CsCl EUTECTIC

Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process

Thermodynamics, Solubility and the Separation of Uranium from Cerium in Molten In/3LiCl-2KCl System

Electrochemical Extraction of Fission Element Samarium from Molten NaCl-2CsCl Eutectic Salt Using the Liquid Gallium Cathode

Electrolytic Extraction of Yttrium Using Recycle Liquid Gallium Electrode from molten LiCl-KCl

Electrochemical separation of Gadolinium from variable valence europium in molten LiCl-KCl via liquid LBE alloy electrode

A simple method for Ce–Nd separation using nano-NaBiO3: Application in the isotopic analysis of U, Sr, Pb, Nd, and Hf in uranium ores

Group Hexavalent Actinide Separation from Lanthanides Using Sodium Bismuthate Chromatography

Electrolytic separation of Dy from Sm in molten LiCl-KCl using Pb-Bi eutectic alloy cathode

Feasibility of density-based separation of Ce and Hf intermetallics in liquid Bi