Abstract:The main purpose of this paper is to study the extraction and separation of key fragment elements based on the electrolytic refining process of spent fuel dry reprocessing. Firstly, the electrochemical mechanisms of Er(III) and Yb(III) in LiCl-KCl molten salts were investigated on W and In film electrodes with applied cyclic voltammetry (CV), square wave voltammetry (SWV) and open circuit potential (OCP) at 773 K. The results indicated that the reduction behaviour of In(III) and Yb(III) ions were a two-step transfer process and Er(III) ions was a one-step transfer process. Then, the kinetic parameters in electrochemical processes were calculated on an In electrode with different temperatures. The OCP approach was used to determine the equilibrium potential of Er(III)/Er(0) in the temperature range of 773 K∼848 K, and thermodynamic parameters of the In 3 Er alloy were provided. Based on electrochemical behaviour results, the electrochemical extraction of Er(III) and Yb(III) from LiCl-KCl-ErCl 3 molten salts and LiCl-KCl-YbCl 3 molten salts at liquid In electrodes was performed by constant potential and constant current electrolysis, respectively. The electrolysis products were determined by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive spectrometry (SEM-EDS), the primary intermetallic compounds generated in the alloys were In 3 Er and In 3 Yb. The average extraction rates for Er(III) and Yb(III) were 94.70% and 96.54%, respectively, according to inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis. Er(III) and Yb(III) were selectively extracted and separated from LiCl-KCl-ErCl 3 -YbCl 3 molten salts by potentiostatic control on the basis of the previously studied Lns (Er and Yb) extraction on In electrodes. The separation rate of Er(III) and Yb(III) by electrochemical selective deposition was 94.21%.

Electrolytic separation of Dy from Sm in molten LiCl-KCl using Pb-Bi eutectic alloy cathode

Electrochemical recovery of dysprosium from LiCl-KCl melt aided by liquid Pb metal

Electroextraction of Ytterbium on the Liquid Lead Cathode in LiCl-KCl Eutectic

Electrochemical properties and extraction of Dy on liquid Sn electrode in LiCl–KCl molten salt

Electrochemical extraction of samarium from molten chlorides in pyrochemical processes

Application of liquid Ga-Pb cathode for selective separation of samarium fission products from molten alkali metal chlorides

Electrochemical separation of Gadolinium from variable valence europium in molten LiCl-KCl via liquid LBE alloy electrode

Electrochemical Separation of Pb-Ag-Sb Alloys in the KCl-PbCl2 Melt

Separation of lanthanides erbium and ytterbium on indium electrodes by modulated potential selective extraction in molten salts and a thermodynamic and kinetic analysis of the process

Selective separation of Y and Nd with similar electrochemical properties by pulsed electrolysis on Sn electrode

Liquid Electrodes for An/Ln Separation in Pyroprocessing

Electrochemical behavior of Sm(III)/Sm(II) and extraction of Sm on reactive electrode from molten LiF-BeF 2

Electrochemical Behavior of Dy(III) and Formation of Dy-Zn Alloy by Co-Reduction with Zn(II) in Eutectic NaCl-KCl Melts

Electrodeposition of magnesium–lithium–dysprosium ternary alloys with controlled components from dysprosium oxide assisted by magnesium chloride in molten chlorides

LiNO 3 -assisted electrochemical extraction of metallic Sm from a molecular liquid-based electrolyte

Electrochemical and kinetic studies on the electrolytic extraction of Gd on Bi electrode in LiCl-KCl melt

Electroreduction of Gd3+on W and Zn Electrodes in LiCl–KCl Eutectic: A Comparison Study

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Accelerated Separation of Uranium from Lanthanides (La, Ce, Sm) in LiCl-KCl Eutectic by Porous Aluminum Electrodes

Development of a Highly Stable Indium-Tin Alloy Cathode System for Enhanced Selective Separation of Europium/dysprosium Fission Products in Molten Chloride

Liquid Al assisted electrochemical extraction of lanthanum by formation of Al11La3 in chloride melts