Electrochemical recovery of dysprosium from LiCl-KCl melt aided by liquid Pb metal

Zhuyao Li,Zhirong Liu,Wenlong Li,Wei Han,Mei Li,Milin Zhang

DOI: https://doi.org/10.1016/j.seppur.2020.117124

IF: 8.6

2020-11-01

Separation and Purification Technology

Abstract:<p>To recover Dy from LiCl-KCl melt, the electroreduction mechanism of Dy(III) on liquid Pb electrode was first studied by CV and Tafel methods. Dy(III) was reducted on liquid Pb electrode at about −1.35 V which is more positive than that on W electrode due to the formation of Dy(Pb) solid solution: Dy(III) + Pb + 3e⁻ = Dy(Pb). Tafel method was used to evaluate the exchange current density (<em>j</em>₀) and charge transfer coefficient (<em>α</em>) of Dy(III)/Dy(Pb) couple on liquid Pb electrode, the influence of different scanning speeds and temperatures on <em>j</em>₀ were studied. The linear dependence of <em>j</em>₀ as a function of temperature was observed, from which the activation energy associated with Dy(III)/Dy(Pb) couple was also obtained. Then, the reduction process of Dy(III) on the Pb film coated on the W electrode was also performed to obtain more information of the Pb-Dy intermetallic compounds. Electrochemical signals associated with the formation of Pb₃Dy, Pb₂Dy, Pb_4/5Dy and Pb_3/5Dy, were observed. The deposition potentials and equilibrium potentials of different Pb-Dy intermetallic compounds were obtained, which are more positive than those of Dy(III) on W electrode. Thermodynamic properties of Pb-Dy intermetallic compounds at 713 K–803 K were calculated employing the determined equilibrium potentials. The metallic Dy was recovered through galvanostatic and potentiostatic electrolysis on liquid Pb cathode and the products were detected by SEM-EDS and XRD. The recovered Dy was found to be in the form of Pb₃Dy intermetallic compound.</p>

engineering, chemical