Abstract:The liquid lead used in fast nuclear reactor has been known to be able to cause a significant damage to the steels. Therefore, finding new materials with high corrosion resistance is the goal of much research current days. Likewise, developing a way to prevent corrosion is also the goal of designers of nuclear reactors. In the present study, we studied materials: Fe, FeNi, FeNiCr, and FeNiCrTi (a type of SS 316L austenite steel), comparing their structural stability when interacted with molten liquid lead at 750 °C. The performance of each steel is compared under high-temperature molten lead coolant, checking the structure's stability to see the material resistance to corrosion attack of liquid lead. The corrosion can also be seen from the data of iron diffusion coefficient. The larger of the iron diffusion coefficient can be associated with larger corrosion because there is a high solubility of iron atoms from the steel surface to the molten lead. The popular way to prevent more corrosion is by injecting oxygen into the lead coolant. This current work uses the molecular dynamics method to simulate the corrosion and inhibition phenomena. The research aims to compare the performance of Fe, FeNi, FeNiCr, and FeNiCrTi under liquid lead at a temperature of 750. The diffusion coefficient of iron of material will be calculated to describe quantitatively the corrosion level of those structural materials and the corrosion inhibition by oxygen injection. The study has produced important results that adding Ni, Cr, Ti into a pure iron crystal to build alloy steel will make the material stronger, structurally compact, and more resistant to corrosion. For specific composition of steels, from weaker to stronger that resist from corrosion attack, it is possible to make ordering: Fe<<FeNi<FeNiCr<FeNiCrTi. The composition of FeNiCrTi steel in this work is Fe(75)Ni(10.57)Cr(14.05)Ti(0.40). The high corrosion of FeNiCrTi in the liquid lead is effectively reduced by injecting 0.0112 wt % oxygen into lead coolant as a limit value for maximum corrosion inhibition

Experimental study on corrosion compatibility of laser-welded ODS steel with liquid lead lithium

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

The Effects of Irradiation on the Improvement in Oxidation Behavior of MX-ODS Steel in Liquid Pb

Study on Corrosion Behavior of China low activation Ferritic/martensitic Steel in Static Liquid Lithium

Study on the Corrosion Behavior of Aluminum Reinforced Austenitic Steel in Liquid Lead Bismuth at 550 °C

Corrosion resistance of 9–12Cr ODS steels in pressurized water for fusion application

Wetting property of liquid Pb on different steel candidates as structural materials for the Generation IV nuclear reactors

Corrosion Behaviors of ODS-FeCrAl in Oxygen-Saturated Lead-Bismuth Eutectic at 550°C: Effects of Grain Boundaries and Minor Elements

Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500$^\circ$C

The Interface Microstructure, Mechanical Properties and Corrosion Resistance of Dissimilar Joints During Multipass Laser Welding for Nuclear Power Plants

Corrosion Experiments of the Candidate Materials for Liquid Lithium Lead Blanket of Fusion Reactor

Preliminary Experiments on the Corrosion of CLAM Steel in Flowing Eutectic LiPb

High-Temperature Corrosion Behaviors of Structural Materials for Lead-Alloy-Cooled Fast Reactor Application

Mechanistic understanding of the localized corrosion behavior of laser powder bed fused 316L stainless steel in pressurized water reactor primary water

Corrosion Studies in Support of Medium-Power Lead-Alloy-Cooled Reactor

Enhanced Radiation-tolerant Oxide Dispersion Strengthened Steel and Its Microstructure Evolution under Helium-implantation and Heavy-ion Irradiation

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Interfacial microstructure and corrosion behavior of ODS FeCrAl alloy in oxygen-saturated lead-bismuth eutectic at 450 °C

Oxidation and dissolution behavior of FeCrNiAl based high entropy alloy and alumina-forming austenitic steel exposed to lead-bismuth eutectic (LBE)

Molecular dynamics simulation of corrosion and its inhibition: comparison of structural stability of Fe/FeNi/FeNiCr/FeNiCrTi steels under high-temperature liquid lead

Dissolution corrosion of FeCrAl alloy exposed to oxygen-depleted lead-bismuth eutectic containing Ni impurities at 600 °C