Abstract:FeCrAl oxide dispersion strengthened (ODS) steel is regarded as one of the most promising candidate materials for nuclear fission reactors such as supercritical pressurized water reactor (SCPWR), sodium-cooled fast reactor (SFR), and lead bismuth-cooled fast reactor (LFR) and so on, since it has excellent irradiation resistance and good corrosion resistance of super-critical water and Pb–Bi coolants. In the present work, irradiation response of a Zr-added FeCrAl ODS steel (15Cr–4Al-0.1Ti-0.6Zr) together with an Al-free ODS (16Cr-0.1Ti) steel and a non-ODS steel T91 was studied. Electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to characterize the microstructures including grains, dislocations, and oxides in the pristine specimens and irradiation defects in the irradiated specimens. Nano-indentation tests were used to evaluate the change in hardness after irradiation. The oxides in the 15Cr–4Al-0.1Ti-0.6Zr specimen are slightly larger than those in the 16Cr-0.1Ti specimen, but with a similar number density. After irradiated with 9.45 MeV 83Bi35+ to 26 dpa at ambient temperature, hardening was observed in all the specimens. Irradiation hardening of the 15Cr–4Al-0.1Ti-0.6Zr specimen is slightly higher than the 16Cr-0.1Ti specimen but significantly lower than the non-ODS steel T91. The irradiation defects in the ODS steel specimens are apparently smaller than those in T91 with a similar number density. By calculating sink strength of the initial microstructures such as grains, dislocations and oxides, the evolution of irradiation defects was discussed. A linear relationship between the irradiation hardening and the sink strength was established. A similar linear relationship between the calculated irradiation hardening using the TEM data (based on dispersion barrier hardening model (DBH) and Friedel-Kroupa-Hirsch (FKH) model, respectively) and sink strength was also found. The calculated irradiation hardening is relatively lower than the experimental value, indicating the possible contribution of Cr segregation to hardening which needs further study.

Corrosion resistance of 9–12Cr ODS steels in pressurized water for fusion application

A Preliminary Work on the Preparation for Neutron Irradiation of Advanced Fusion Materials Using Small Samples in China

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Corrosion Behavior of Ferritic 12Cr ODS and Martensitic X46Cr13 Steels in Nitric Acid and Sodium Chloride Solutions

Corrosion Behavior of Oxide Dispersion Strengthened Ferritic Steels in Supercritical Water

Corrosion Resistance of Candidate Cladding Materials for Supercritical Water Reactor

Enhanced Radiation-tolerant Oxide Dispersion Strengthened Steel and Its Microstructure Evolution under Helium-implantation and Heavy-ion Irradiation

Experimental study on corrosion compatibility of laser-welded ODS steel with liquid lead lithium

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Comparison and mechanism research of corrosion behavior of materials used in supercritical water-cooled reactors

Corrosion of Zircaloy-4, Zr-1Nb and FeCrAl Alloys in Deaerated Water at 330 °C and 14 MPa: Superior Corrosion Resistance and Corrosion Mechanism of FeCrAl Alloy by Experiments and Molecular Dynamics Simulations

A Study on the Corrosion and Stress Corrosion Cracking Susceptibility of 310-ODS Steel in Supercritical Water

HIGH TEMPERATURE TENSILE TEST OF 12CR FERRITIC ODS STEEL

Early corrosion behaviour of irradiated FeCrAl alloy in a simulated pressurized water reactor environment

High-Temperature Corrosion Behaviors of Structural Materials for Lead-Alloy-Cooled Fast Reactor Application

The Irradiation Effects in Ferritic, Ferritic-Martensitic and Austenitic Oxide Dispersion Strengthened Alloys: A Review

Corrosion Behavior of FBR Structural Materials in High Temperature Supercritical CO2

Research on the Corrosion Resistance of Porous Coatings for Heat Transfer Enhancement on the Head of Nuclear Reactor Pressure Vessels

Corrosion of 316L exposed to highly concentrated borated water used as shield in nuclear fusion experimental reactors cooling circuits

Corrosion characteristics of Fe, Ni and Ti based alloys near the critical point of water and during supercritical water gasification and oxidation of municipal sludge

CORROSION BEHAVIOR OF NUCLEAR GRADE ALLOYS 690 AND 800 IN SIMULATED HIGH TEMPERATURE AND HIGH PRESSURE PRIMARY WATER OF PRESSURIZED WATER REACTOR