Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Effect of Thermal Treatment on the Granite Dynamic Fracture Toughness and Its Structural-Temporal Characteristics

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Dynamic response and fracture characteristics of thermally-treated granite under dynamic loading

Experimental investigation of mixed mode I-II fracture property of thermally treated granite under dynamic loading

Thermal effects on fracture toughness of cracked straight-through Brazilian disk green sandstone and granite

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Thermal treatment effects on rock fracture behaviour under three loading modes: A comparative analysis of granite and mudstone

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Dynamic compression behaviors of heat-treated granite under combined dynamic and static load

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Temperature dependences and rate effects on Mode II fracture toughness determined by punch-through shear technique for granite

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Theoretical and experimental study on mixed-mode I + II fracture characteristics of thermally treated granite under liquid nitrogen cooling

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite