Abstract:Experiments and numerical simulations have been done to investigate the heat transfer, pressure loss and turbulent flow characteristics over the surfaces with arrays of shallow dimples of different dimple depths within channels. Three different dimple depth to diameter ratios of 0.067, 0.1 and 0.2 are investigated with the Reynolds number (Re) ranging from 10,000 to 60,000. Heat transfer measurements were done by using the transient liquid crystal thermography technique to obtain the local heat transfer enhancement characteristics. Additional steady-state experiments were also done to obtain the overall heat transfer enhancement and the pressure loss of the turbulent flow over the dimpled surfaces. The experimental results indicated that the dimple depth has appreciable effects on heat transfer enhancement and pressure loss. The Reynolds number also shows appreciable effects on the local heat transfer enhancement distribution on the surface with shallower dimples. The overall heat transfer enhancement of all the dimpled surfaces approximately keep constant with the Reynolds numbers. The experiments still indicate that the shallow dimples with the depth to diameter ratio of 0.067 obtained almost constant overall heat transfer enhancement up to 1.4 with negligible pressure loss penalty, which indicates a high and constant Reynolds analogy factor of about 1.33 over the studied Reynolds number range. However, as the dimple depth ratio increases from 0.067 to 0.2, the pressure loss increases rapidly and surpasses the heat transfer enhancement, which leads to lower Reynolds analogy factor than 1.0. Furthermore, the numerical simulations show detailed turbulent flow characteristics over the dimpled surfaces. Different from the dimples with relatively deep depth ratios of 0.1 and 0.2, the shallower dimples with the depth ratio of 0.067 generate an obvious low-speed swirling horseshoe vortex zone near the upstream rim in the dimples at the relatively high Reynolds number of 50,500. The horseshoe vortex shed from spanwise edges of the shallow dimples produces lower but more uniform turbulent mixing intensity in the near-wall region, which is responsible for the higher thermal performance.

Evaluation of thermal-hydraulic performance of dimpled tube from the perspective of skewness and kurtosis

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

Heat transfer and hydrodynamics analysis of a novel dimpled tube

Numerical investigation of flow and heat transfer in enhanced tube with slot dimples

A Numerical Study On Fluid Flow And Heat Transfer Performance Of Internally Roughened Tubes With Dimples

Experimental and Numerical Investigation of Thermal Performance of Channels with Staggered Array-Based Dimples

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels with Dimples of Different Shapes

Heat Transfer and Friction Characteristics for Turbulent Flow of Dimpled Tubes

Study the influence of concavity shapes on augmentation of heat‐transfer performance, pressure field, and fluid pattern in three‐dimensional pipe

Experimental Study and Numerical Analysis of Heat Transfer Enhancement and Turbulent Flow over Shallowly Dimpled Channel Surfaces

Heat Transfer of Turbulent Flow over Surfaces with Spherical Dimples and Teardrop Dimples

Thermohydraulic analysis of hybrid smooth and spirally corrugated tubes

Numerical Investigation of Flow and Heat Transfer in A Dimpled Channel among Transitional Reynolds Numbers

Prediction and Analysis of Thermal‐hydraulic Performance of Tubes with Teardrop Dimples Based on Artificial Neural Networks

Numerical simulation of dimled tubes for heat transfer enhancement

Evaluation of thermal hydraulic flow and enhancement of heat performance in different 3D dimpled tube configurations according to design of experiment analysis

Numerical and Experimental Investigation of Flow and Heat Transfer in Heat Exchanger Channels with Different Dimples Geometries

A Numerical Investigation of Dimple Effects on Internal Heat Transfer Enhancement of A Double Wall Cooling Structure with Jet Impingement

Numerical Study on Hot Spot Minimization and Heat Transfer Enhancement of Narrow Rectangular Channel with Slit Elliptic Dimples

Heat Transfer and Pressure Loss Characteristics in a Swirl Cooling Tube with Dimples on the Tube Inner Surface

Effect of elliptical dimples on heat transfer performance in a shell and tube heat exchanger