Abstract:Experiments and numerical simulations have been done to investigate the heat transfer, pressure loss and turbulent flow characteristics over the surfaces with arrays of shallow dimples of different dimple depths within channels. Three different dimple depth to diameter ratios of 0.067, 0.1 and 0.2 are investigated with the Reynolds number (Re) ranging from 10,000 to 60,000. Heat transfer measurements were done by using the transient liquid crystal thermography technique to obtain the local heat transfer enhancement characteristics. Additional steady-state experiments were also done to obtain the overall heat transfer enhancement and the pressure loss of the turbulent flow over the dimpled surfaces. The experimental results indicated that the dimple depth has appreciable effects on heat transfer enhancement and pressure loss. The Reynolds number also shows appreciable effects on the local heat transfer enhancement distribution on the surface with shallower dimples. The overall heat transfer enhancement of all the dimpled surfaces approximately keep constant with the Reynolds numbers. The experiments still indicate that the shallow dimples with the depth to diameter ratio of 0.067 obtained almost constant overall heat transfer enhancement up to 1.4 with negligible pressure loss penalty, which indicates a high and constant Reynolds analogy factor of about 1.33 over the studied Reynolds number range. However, as the dimple depth ratio increases from 0.067 to 0.2, the pressure loss increases rapidly and surpasses the heat transfer enhancement, which leads to lower Reynolds analogy factor than 1.0. Furthermore, the numerical simulations show detailed turbulent flow characteristics over the dimpled surfaces. Different from the dimples with relatively deep depth ratios of 0.1 and 0.2, the shallower dimples with the depth ratio of 0.067 generate an obvious low-speed swirling horseshoe vortex zone near the upstream rim in the dimples at the relatively high Reynolds number of 50,500. The horseshoe vortex shed from spanwise edges of the shallow dimples produces lower but more uniform turbulent mixing intensity in the near-wall region, which is responsible for the higher thermal performance.

The Structural Optimization of Dimple in Microchannel for Heat Transfer Enhancement

Numerical study of the convective heat transfer enhancement in the micro channel with dimples and cylindrical grooves

Heat Transfer Enhancement in Mini-Channel Heat Sinks with Dimples and Cylindrical Grooves

Thermo-hydraulic performance inside convergent rectangle channel with large-deformed dimples

A Numerical Investigation of Dimple Effects on Internal Heat Transfer Enhancement of A Double Wall Cooling Structure with Jet Impingement

Heat Transfer Analysis on Dimple Geometries and Arrangements in Dimple Jacketed Heat Exchanger

Experimental Study and Numerical Analysis of Heat Transfer Enhancement and Turbulent Flow over Shallowly Dimpled Channel Surfaces

Flow And Heat Transfer In Microchannels With Dimples And Protrusions

Heat Transfer Enhancement in Micro-channel with Dimples and Protrusions

Numerical Analysis of Flow Structure and Heat Transfer Characteristics in Dimpled Channels with Secondary Protrusions

Multi-Objective Optimization Of The Dimple/Protrusion Channel With Pin Fins For Heat Transfer Enhancement

Influence of Dimple Diameter and Depth on Heat Transfer of Impingement-Cooled Turbine Leading Edge with Cross-Flow and Dimple

Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures

An Experimental Investigation on the Flow Characteristics Over Dimple Arrays Pertinent to Internal Cooling of Turbine Blades

Numerical Investigation on Heat Transfer Performance and Flow Characteristics in a Rectangular Air Cooling Channel (AR = 2) with Ridged Dimples

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels with Dimples of Different Shapes

Numerical Analysis of Heat Transfer Characteristics in a Pin Fin-Dimpled Channel with Different Pin Fins and Dimple Locations

Computational investigation of dimple effects on heat transfer and friction factor in a Lamilloy cooling structure

A Numerical Study of the Flow and Heat Transfer in the Pin Fin-Dimple Channels with Various Dimple Depths

Numerical and Experimental Investigation of Flow and Heat Transfer in Heat Exchanger Channels with Different Dimples Geometries

Experimental and Numerical Investigation of Thermal Performance of Channels with Staggered Array-Based Dimples