Abstract:Magnetic Resonance Imaging (MRI) experiments have been performed in conjunction with Direct Numerical Simulations (DNS) to study neutrally buoyant particle-laden pipe flows. The flows are characterized by the suspension liquid Reynolds number ($Re_s$), based on the bulk liquid velocity and suspension viscosity obtained from Eilers' correlation, the bulk solid volume fraction ($\phi_b$) and the particle-to-pipe diameter ratio ($d/D$). Six different cases have been studied, each with a unique combination of $Re_s$ and $\phi$, while $d/D$ is kept constant at 0.058. These cases ensure that the comparison is performed across different flow regimes, each exhibiting characteristic behavior. In general, an excellent agreement is found between experiment and simulation for the average liquid velocity and solid volume fraction profiles. This study presents, for the first time, accurate and quantitative velocity and volume fraction profiles of semi-dilute up to dense suspension flows using both experimental and numerical methods. The discrepancy between the experiments and simulations can be explained by various reasons, including a difference in particle size distribution, uncertainty in experimental parameters used as an input for the DNS, slight variations in particle roughness and frictional collisions in the simulations. Eventually, three different flow regimes are identified. For low bulk solid volume fractions a drag increase is observed. For moderate $\phi_b$ the drag is found to decrease, due to particle accumulation at the pipe centre. For high volume fractions the drag is found to decrease further. For solid volume fractions of 0.4 a drag reduction higher than 25% is found. This drag reduction is linked to the strong viscosity gradient in the radial direction, where the relatively low viscosity near the pipe wall acts as a lubrication layer between the pipe wall and the dense core.

Hydrodynamics in a randomly packed bed of spheres: A comparison between PR‐CFD simulations and MRI experiments

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Pore network modelling of slender packed bed reactors

Experimental and numerical investigation to elucidate the fluid flow through packed beds with structured particle packings

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Magnetic resonance imaging of trickle flow

DEM-CFD Simulation Analysis of Heat Transfer Characteristics for Hydrogen Flow in Randomly Packed Beds

Local simulations of MRI turbulence with meshless methods

Flow analysis through a randomly packed pebble-bed geometry using computational fluid dynamics

Hydrodynamics of bubble flow through a porous medium with applications to packed bed reactors

Particle-resolved simulations and measurements of the flow through a uniform packed bed

Comparing two IBM implementations for the simulation of uniform packed beds

High-resolution measurements and simulations of the flow through a packed bed and its freeboard region

From nearly homogeneous to core-peaking suspensions: insight in suspension pipe flows using MRI and DNS

Direct Numerical Simulation of the Flow Through a Randomly Packed Pebble Bed

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Prediction of cross flow mixing in the structured packed bed through CFD simulation using (FBM and PMM) and validation with experiments