Abstract:The gas-solid flow in a three-dimensional slot-rectangular spouted bed is numerically investigated under the parallel framework of the computational fluid dynamics-discrete element method coupling approach. The fluid phase is solved with the k-epsilon turbulence model at the computational grid level, while the solid phase is tracked individually with the discrete element method at the particle scale. Millions of particles are calculated using a total number of 112 CPUs in a cluster. The predicted pressure drop profiles and the minimum spouting velocities of the calculations under different bed heights agree well with the experimental data. The startup procedure and the solid flow pattern are identified. Then, wall effects on the distribution properties of the gas-solid hydrodynamics are explored. Moreover, the interaction between spout and annulus and the effects of the superficial velocity and bed height on the bed hydrodynamics are discussed. The results show that a larger pressure drop appears in the system with a higher bed height. A bubble with its shape influenced by the slot geometry is formed in the startup procedure. Moreover, the bed hydrodynamics show a strong 3-D behavior along the depth direction. Large vertical solid flux mainly concentrates in the central region of the spout. The spout-annulus interface is dramatically influenced by the slot shape and shows different evolutionary tendencies in the different directions, and this influence becomes weaker along the bed height. The larger the superficial velocity is, the higher the bed height and the larger the spouting height appear. Besides, solid flow patterns under different bed heights with the superficial velocity the same ratio to the corresponding minimum spouting velocity show a similar behavior.

Particle-resolved simulations and measurements of the flow through a uniform packed bed

High-resolution measurements and simulations of the flow through a packed bed and its freeboard region

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Particle Velocity Measurements in Transition Section of Turbulent Fluidized Beds Using Optical Fiber Probe and CFD Simulation

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical simulation for character of fluid flow through packed bed

Experimental and numerical investigation to elucidate the fluid flow through packed beds with structured particle packings

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Discrete Particle Simulation and Visualized Research of the Gas−Solid Flow in an Internally Circulating Fluidized Bed

Numerical Study Of Flow And Heat Transfer In Novel Structure Packed Beds

Direct Particle Simulation of Flow Characteristics in Bubbling Fluidized Bed

Modeling gas flows in packed beds with the lattice Boltzmann method: validation against experiments

Flow patterns of solids in a two-dimensional spouted bed with draft plates: PIV measurement and DEM simulations

Numerical analysis of fluid flow and heat transfer in various composite packed beds

A Network Model and Numerical Simulations of Flow Distributions in Packed Bed Reactors with Different Packing Structures

Three-Dimensional Modeling of Gas–Solid Motion in a Slot-Rectangular Spouted Bed with the Parallel Framework of the Computational Fluid Dynamics–Discrete Element Method Coupling Approach