Abstract:Characterization of the damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates by a combined experimental and finite element approach. In this paper, the mechanical properties, damage modes, and bolt load distribution of the bonded‐bolted hybrid three‐bolt joint were investigated by a combination of experiments and numerical simulations. Acoustic emission (AE) was used to monitor the tensile process of the connection in real time, and the K‐means clustering algorithm was used to realize the cluster analysis of the damage modes. A numerical simulation model of the tensile process of the joint was established using ABAQUS simulation software. The progressive damage evolution of composite laminates, and adhesive layer was characterized by using the VUMAT subroutine, the B‐K failure criterion, and cohesive element with zero thickness, respectively. The results show that four main damage modes occur in composite laminates during tension: matrix cracking, delamination, fiber pull‐out, and fiber breakage, with corresponding peak frequency ranges of (0–80 kHz), (80–210 kHz), (210–330 kHz), and (330–375 kHz), respectively. The adhesive layer between the laminates mainly exhibits peeling failure because of the secondary bending effect. In the load‐bearing process, the adhesive layer was loaded first and failed, and the bolt loading was delayed. Meanwhile, the results of bolt load distribution showed that the bolts and the adhesive layer at both ends carried greater loads. Highlights Damage modes and damage evolution of the bonded‐bolted hybrid joint in tension were analyzed by combining acoustic emission technology and numerical simulation. The simulation of delamination damage in composite laminates was carried out by inserting zero‐thickness cohesive elements into the laminates, and the delamination damage between the carbon fiber layup and the adjacent glass fiber layup was analyzed. The effect of the inclusion of the adhesive layer on the mechanical properties of the joint and the distribution of the bolt load was analyzed.

Experimental and numerical investigation of mesoscopic damage accumulation in adhesively bonded composite scarf joints

Progressive failure analysis of 2D woven composites at the meso-micro scale

Experimental and Numerical Studies on the Failure Mechanism of the Composite Scarf Joints with Bonding Flaws

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Finite Element Analysis of Low-Speed Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints

Influence of Failure-Load Prediction in Composite Single-Lap Joints with Brittle and Ductile Adhesives Using Different Progressive-Damage Techniques

Damage tolerance analysis of double strap joints with composite adherends

Characterization of damage behavior and failure mechanisms of the bonded‐bolted hybrid three‐bolt joint in composite laminates

Tensile Properties of Scarf-Repaired Composite Laminates with Bonding Defects

Mesoscale mechanism of damage in fracture process zone of CFRP laminates simulated with triaxial stress state-dependent constitutive equation of matrix resin

Damage Evolution and Fracture Behavior of C/SiC Minicomposites with Different Interphases under Uniaxial Tensile Load

Experimental and numerical investigation of damage evolution in carbon fiber reinforced polymer stiffened panel in post-buckling regime

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Experimental multi-scale characterization of mode-II interlaminar fracture in geometrically scaled stitched and unstitched resin-infused composites

Material and adhesive effect in adhesively-bonded composite stepped-lap joints

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Simulation Study of the Damage Mechanisms Appearing in a Cross Ply Composite Material Loaded in Uniaxial Tension

Experimental and numerical investigation of progressive damage and failure behavior for 2.5D woven alumina fiber/silica matrix composites under a complex in-plane stress state

In Situ Observation and Modeling of Damage Modes in Cross-Ply Ceramic Matrix Composites

A Quantitative Representation of Damage and Failure Response of 3D Textile SiC/SiC Ceramics Matrix Composites Subjected to Flexural Loading