Intermediate Principal Stress Effects on the 3D Cracking Behavior of Flawed Rocks Under True Triaxial Compression

Yuan Sun,Fan Fei,Louis Ngai Yuen Wong,Jinhyun Choo
DOI: https://doi.org/10.1007/s00603-024-03777-x
IF: 6.518
2024-03-07
Rock Mechanics and Rock Engineering
Abstract:Crack initiation, growth, and coalescence in flawed rocks have been extensively studied for 2D (planar, penetrating) flaws under uniaxial/biaxial compression. However, little is known as to the mechanisms and processes of cracking from 3D flaws under true triaxial compression, where the intermediate principal stress ( ) is distinguished from the major and minor principal stresses. In this work, we systematically investigate the effects of on the 3D cracking behavior of rock specimens with preexisting flaws, through the use of mechanistic simulations of mixed-mode fracture in rocks. We explore how two characteristics of , namely, (i) its orientation with respect to the flaw and (ii) its magnitude, affect two aspects of the cracking behavior, namely, (i) the cracking pattern and (ii) the peak stress. Results show that the orientation of exerts more control over the cracking pattern than the flaw inclination angle. The peak stress becomes highest when is parallel to the flaw, whereas it becomes lowest when is parallel to the flaw. Also, the effects of magnitude are more significant when becomes more oblique to the flaw plane. On the basis of our observations, we propose mechanisms underlying the cracking behavior of 3D flawed rocks under true triaxial compression.
geosciences, multidisciplinary,engineering, geological
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the influence mechanism of the intermediate principal stress (\(\sigma_2\)) on the three - dimensional crack behavior of rocks with pre - existing defects under true triaxial compression conditions. Specifically, the research aims to systematically explore how two characteristics - the direction and magnitude of the intermediate principal stress - affect the crack formation pattern and peak stress in rock samples. This research fills the gap in the existing literature, that is, the lack of understanding of the crack behavior of rocks with three - dimensional defects under true triaxial stress states, especially when considering the role of the intermediate principal stress. ### Research Background and Motivation Rock is a heterogeneous brittle material containing cross - scale defects. These pre - existing defects are sources of stress concentration, which in turn lead to the generation, growth, and coalescence of cracks, and ultimately lead to the failure of the material. Cracks generated from pre - existing defects are the cause of rock failures observed in many underground rock structures and natural rock masses. Although a large number of studies have investigated the crack generation, growth, and coalescence processes of two - dimensional (planar, penetrating) defects under uniaxial or biaxial compression, little is known about the crack behavior and its mechanism of three - dimensional defects under true triaxial compression, especially under the action of the intermediate principal stress (\(\sigma_2\)). ### Main Research Contents This paper systematically studies the influence of the intermediate principal stress (\(\sigma_2\)) on the three - dimensional crack behavior of rocks with pre - existing defects by mechanically simulating the propagation of mixed - mode cracks in rocks. The research focuses on two aspects: 1. **Crack Pattern**: It studies how the angle of the direction of the intermediate principal stress relative to the defect affects the crack formation pattern. 2. **Peak Stress**: It explores how the magnitude of the intermediate principal stress affects the peak stress of rock samples. ### Key Findings - The control effect of the direction of the intermediate principal stress on the crack pattern is greater than that of the defect inclination angle. - When the maximum principal stress (\(\sigma_1\)) is parallel to the defect, the peak stress is the highest; while when the intermediate principal stress (\(\sigma_2\)) is parallel to the defect, the peak stress is the lowest. - As the intermediate principal stress (\(\sigma_2\)) becomes more inclined relative to the defect plane, the influence of its magnitude becomes more significant. ### Conclusion Based on the observation results, the author proposes the potential mechanism of crack behavior of rocks with three - dimensional defects under true triaxial compression conditions. These findings are helpful for better understanding the rock fracture process under complex geological conditions and provide theoretical support for rock engineering design.