Abstract:Experiments have been carried out to study the relationship between the addition of tantalum and microstructure, especially the formation of the B2 phase in lamellar colonies. The mechanical properties, with different contents of Ta, were also measured. Ti46Al8Nb2.6CxTa alloys were prepared by casting with the content of Ta varying from zero to 1.0 at.%. Experimental results show that the B2 phase forms in lamellar colonies with the addition of Ta, and its content increases when the content of Ta increases. Meanwhile, the γ phase decreases and the lattice parameter of the α 2 phase increases. The size of the lamellar colony decreased from 29.9 to 21.6 μm. Ta dissolves into Ti2AlC by substitution, and its solubility is more than 1.1% tested by EDS. Nb, which is necessary for the formation of the B2 phase, comes from two aspects. The first is that Ta dissolves into the Ti2AlC and partly replaces the Nb atom and the second is the decrease in the γ phase because it has higher solid solubility for Nb. The increase in Nb in the liquid phase increases the composition supercooling and heteronucleation at the solidification front, which accounts for refining the lamellar colony. Room temperature compressive testing showed that the compressive strength and the strain increased when the Ta content increased up to 0.8% and then decreased. Improvement of the compressive properties resulted from the grain boundary strengthening and their decrease induced by more content of the B2 phase. Tensile properties, at elevated temperature, were improved with testing temperature increasing from 750 to 950°C, because solid solution strengthening is a major influence factor.

Effect of 20 mol% Al addition on phase formation and mechanical properties of TaCx (x=0.5, 0.55, 0.6 and 0.7) ceramics

Effects of Al Addition on Densification, Microstructure and Mechanical Properties of TaC-Al Ceramics

Effects of Al2O3 content on densification, microstructure, mechanical properties and oxidation resistance of TaC-Al2O3 composites

Adjusting the /<sub>2</sub> and Ti<sub>2</sub>AlC phase on microstructure evolution and improving mechanical properties at room and elevated temperatures with the addition of Ta

Controlling Ζ-Ta4c3- Laminate Growth in TaC0.6 Ceramic by Addition of Cu and Its Effect on Mechanical Properties

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Effect of Ta addition on microstructures, mechanical and damping properties of Cu–Al–Mn–Ti alloy

Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au

Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2AlC

Microstructure and Properties of Bulk Ta2AlC Ceramic Synthesized by an in Situ Reaction/hot Pressing Method

Effects of TaC Addition on Microstructure and Mechanical Properties of SiBCN Composite Ceramics

Effect of carbon content on the microstructure and mechanical properties of high-entropy (Ti0.2Zr0.2Nb0.2Ta0.2Mo0.2)Cx ceramics

Influence of TiC content on microstructure and mechanical properties of (Ta, Ti)C ceramics

Effects of Ta Addition on the Microstructure, Compression Properties and Oxidation Resistance of NiAl-Cr(Mo) Alloy

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

Preparation and mechanical properties of titanium alloy matrix composites reinforced by Ti3AlC and TiC ceramic particulates

First-principle calculations and experimental investigations of thermal barrier coating on (AlxY1-x)TaO4 ceramics

Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase

Strengthened Interfacial Bonding and Its Effects on Fracture Mode of TaC Ceramics with Addition of B

Stacking behavior of the close-packed Ta-atom planes and its effects on formation of “hybrid grains” in TaC0.66-0.7 ceramics

Microstructure and mechanical properties of TaC ceramics with 1–7.5 mol% Si as sintering aid