Abstract:A two-to-three (2/3)-level dual-active-bridge (DAB) converter is a promising dc-dc converter for medium- and high-voltage applications. That is due to its advantages like high power density, galvanic isolation, and capability of withstanding higher voltage ratings compared to the two-level DAB converters. However, the open-circuit fault (OCF) is critical for the 2/3-level DAB converters, resulting in various negative effects, e.g., dc bias, overshoot current, and capacitor voltage imbalance. To address these issues, it is necessary to develop fault diagnosis and fault-tolerant control strategies. This article, thus, proposes a method to identify the faulty switch based on the dynamic characteristics when the OCF occurs. The midpoint voltages of the neutral-point-clamped bridge arms are employed as the fault diagnosis signals, where the faulty switch can be identified accurately based on the mean values and duty cycles of the midpoint voltages. Subsequently, a fault-tolerant control scheme based on a complementary-switch-blocking method is proposed. In this scheme, when the OCF occurs on one switch, the gate-driving signal of its complementary switch is blocked, and the OCF negative effects, e.g., dc bias, overshoot current, and unbalanced capacitor voltages, can be alleviated significantly. Furthermore, the power transfer capability of the 2/3-level DAB converters is enhanced with the proposed scheme compared to the traditional bypass-arm method. Finally, experimental tests are carried out to verify the theoretical analysis.

A Global State Observer-Based Open-Switch Fault Diagnosis for Bidirectional DC-DC Converters in Hybrid Energy Source System

A Simple and Efficient Strategy for Online Detection of Multiple Open-Switch Fault in Multiphase Machine Drive Systems

A Comparative Study of Two Diagnostic Methods Based on the Switching Voltage Pattern for Igbt Open-Circuit Faults in Voltage-Source Inverters

Dynamic State Estimation Enabled Health Indicator for Parametric Fault Detection in Switching Power Converters

A Model-Data-Hybrid-Driven Diagnosis Method for Open-Switch Faults in Power Converters

A Reduced-Order Observer-Based Method for Simultaneous Diagnosis of Open-Switch and Current Sensor Faults of a Grid-Tied NPC Inverter

Observer-based Fault Estimation for a Class of Discrete-Time Switched Affine Systems: an Application to the DC-DC Converter

A Simultaneous Diagnosis Approach for Power Switch, Grid-Side Current Sensor, and DC-Link Voltage Sensor Faults in Single-Phase Three-Level Rectifiers

An Open-Circuit Fault Diagnosis Method for LLC Converters

Detection and Isolation of Multiple Faults in a Modular Multilevel Converter Based on a Sliding Mode Observer

A Simple and Effective Open-Circuit-Fault Diagnosis Method for Grid-Tied Power Converters—A New Technique Based on Tellegen's Theorem

Fault Detection and Identification Strategy Based on Luenberger Observer for Bidirectional Interleaved Switched—Capacitor DC–DC Converter Interfaced Microgrids

Fault diagnosis scheme for open-circuit faults in switched reluctance motor drives using fast Fourier transform algorithm with bus current detection

Open-circuit Fault Detection and Isolation for Modular Multilevel Converter Based on Sliding Mode Observer

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

Open-Circuit Fault Diagnosis and Tolerant Control for 2/3-Level DAB Converters

Open-Switch Fault Diagnosis of Three-Phase PWM Converter Systems for Magnet Power Supply on EAST

Multiple Open-Switch Fault Diagnosis for Three-Phase Four-Leg Inverter under Unbalanced Loads via Interval Sliding Mode Observer

Open-Circuit Fault Analysis and Fault-Tolerant Control for 2/3-Level DAB Converters

Transient Modeling Method for Faulty DC Microgrid Considering Control Effect of DC/AC and DC/DC Converters.

A Concurrent Diagnosis Method of IGBT Open-Circuit Faults in Modular Multilevel Converters