Abstract:Epoxy resin nanocomposites are widely used in the field of electrical insulation packaging. It is of great significance to regulate the dielectric and insulation properties of composite materials by introducing nano-filler to meet special application requirements. This work proposes a chemical copolymerization method, fluorinated polystyrene nanospheres are synthesized through an addition reaction as filler, and finally the epoxy nanocomposites are prepared. The polystyrene nanospheres have a uniform size and good compatibility with the epoxy resin. The introducing of nanospheres reduces the dielectric constant of the epoxy resin composite material and increases the breakdown strength simultaneously. Although the dielectric loss increases, the composites' imaginary part remains below 0.04 within 1 MHz frequency. In particular, the fluorinated polystyrene/epoxy composite with a mass fraction of 2% exhibits a decrease in dielectric constant and DC conductivity, while the AC breakdown strength and DC breakdown strength increase by 12.6% and 6%, respectively. The results of the pulse electro-acoustic method indicate that the charge injection of the epoxy resin filled with non-fluorinated polystyrene nanospheres is evident, while the introduction of fluorinated nanospheres significantly reduces the charge injection level. Calculations based on the depolarization process reveal that the introduction of fillers leads to an increase in trap density and depth of energy levels in the composites. Notably, the epoxy resin filled with fluorinated fillers has the deepest trap levels, providing an explanation for the improved insulation breakdown performance. The research can provide guidance for regulating dielectric properties of epoxy composites and material synthesis for the application of electrical insulation packaging.

Study on the foaming behavior of density‐controllable epoxy resin composite foam under negative pressure environment

High-Strength and Shape-Memory Epoxy Cellular Material with Wood-Like Architecture

Improving Insulation Properties of Epoxy Filled with Surface Fluorinated Polystyrene Nanospheres

Poly(ether imide)/Epoxy Foam Composites with a Microcellular Structure and Ultralow Density: Bead Foam Fabrication, Compression Molding, Mechanical Properties, Thermal Stability, and Flame-Retardant Properties

Synergetic Effect Between Curing Reaction and CO2 Diffusion for Microcellular Epoxy Foam Preparation in Supercritical CO2

Preparation of epoxy resin foam by composite foaming agent prepared from microporous silica and 4,4 '-bisoxybenzenesulfonyl hydrazide

Study on foaming behavior of block copolymer/inorganic particles co‐construction of toughened epoxy resin foams

Rational Design of High‐performance Epoxy/expandable Microsphere Foam with Outstanding Mechanical, Thermal, and Dielectric Properties

SF6-Epoxy Foam Insulation Material with Ultra-Low Dielectric Loss: Morphological and Performance Control

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Ultralow Dielectric Constant Polyarylene Ether Nitrile/Polyhedral Oligomeric Silsesquioxanes Foams with High Thermal Stabilities and Excellent Mechanical Properties Prepared by Supercritical CO 2

Minimizing Drying Shrinkage and Enhancing Impermeability of Foam Concrete Modified with Epoxy Resin

Study on Quasi-Static Compressive Properties of Aluminum Foam-Epoxy Resin Composite Structures

Novel preparation method and fire performance study of EPS composites based on calcium sulphate hemihydrate

Foaming Behavior of the Fluorinated Ethylene Propylene Copolymer Assisted with Supercritical Carbon Dioxide

New Insights on Expandability of Pre-Cured Epoxy Using a Solid-State CO2-Foaming Technique

Piezoresistance Behavior of LDPE/EVA/CB Foam Conductive Composites

Strategy for Preparation of Microcellular Rigid Polyurethane Foams with Uniform Fine Cells and High Expansion Ratio Using Supercritical CO2 As Blowing Agent

Effects of reactive diluent on processing, structure, and properties of epoxy foams and their sandwich composites

Preparation of Superelastic, Durable, and Lightweight Composite Foams Based on Multiple Cross-Linked Network Regulated Structures

A Novel Process to High‐strength and Controlled‐shrinkage Al2O3 Foams with Open‐cell by Al Powder Hollowing Technology