Abstract:The oxidation behavior of titanium-tantalumalloys was investigated with respective concentrationsof each element ranging from 0 to 100 wt.%. Alloys wereexposed to argon-20% oxygen at 800 to 1400°C. Theslowest oxidation rates were observed in alloys with5-20% Ta. The oxidation kinetics of alloys containingless than approximately 40% Ta were approximatelyparabolic. Pure Ta exhibited nearly linear kinetics. Alloys containing 50% or more Taexhibited paralinear kinetics. The activation energiesfor oxidation ranged between 232 kJ/mole for pure Ti and119 kJ/mole for pure Ta, with the activation energies of the alloys falling between these values andgenerally decreasing with increasing Ta content. Theactivation energies for oxidation of the end members, Tiand Ta, agree well with published values for the activation energies for diffusion of oxygenin α-Ti and Ta. Scale formation in the alloys wasfound to be complex exhibiting various layers of Ti-,Ta-, and TiTa-oxides. The outermost layer of the oxidized alloys was predominately rutile(TiO2). Beneath the TiO2 grew avariety of other oxides with the Ta content generallyincreasing with proximity to the metal-oxide interface.It was found that the most oxidation-resistant alloys hadcompositions falling between Ti5Ta andTi-15Ta. Although Ta stabilizes the β-phase of Ti,the kinetics of oxidation appeared to be rate limited byoxygen transport through the oxygen-stabilized α-phase.However, the kinetics are complicated by the formationof a complex oxide, which cracks periodically. Tantalumappears to increase the compositional range ofoxygen-stabilized α-phase and reduces both the solubilityof oxygen and diffusivity of Ti in the α- andβ-phases.

The effects of nitrogen on the kinetics and mechanisms of oxidation of Titanium-Tantalum alloys

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Surface Characterization of Thermally Oxidized Titanium Alloys

Composition Dependence of the Kinetics and Mechanisms of Thermal Oxidation of Titanium-Tantalum Alloys

Role of nitrogen in the high-temperature oxidation of titanium alloys

Role of nitrogen and tantalum in the high-temperature oxidation behavior of AlCoCr 0.5 NiTa x Ti(N) alloys synthesized by laser in situ synthesis

Effect of Nitridation on the Oxidation Behavior of TiAl-based Intermetallic Alloys

Effect of Nb Content and Temperature on the TiN Formation During the Oxidation of Ti 3 Al

Oxidation Kinetics of the Nitrided TiAl-based Alloys

Non-Isothermal Oxidation Behavior and Mechanism of a High Temperature Near-α Titanium Alloy

Effect of Nitrogen Protective Atmosphere on Microstructure and High Temperature Erosion Property of TiAl3 and Cr3C2 Composite Coatings

The Effect of Nb, Ta, and Ti on the Oxidation of a New Polycrystalline Ni-Based Superalloy

Origin of High Temperature Oxidation Resistance of Ti-Al-Ta-N Coatings

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Insight into the Ta alloying effects on the oxidation behavior and mechanism of cast TiAl alloy

Effect of Nitrogen Content on the Mechanical and Biological Properties of Tantalum Nitride Coatings

Effects of nitrogen composition on the resistivity of reactively sputtered TaN thin films

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

Early oxidation behavior of Ti50Al and Ti45Al8Nb alloys

Evolution of chemical, structural, and mechanical properties of titanium nitride thin films deposited under different nitrogen partial pressure