Abstract:The falling weight deflectometer (FWD) testing is widely used as a nondestructive technique to backcalculate layer properties of in-situ asphalt pavement structures. Traditionally, static backcalculation methods based on the layered elastic theory (LET) are employed to analyze FWD data. However, the static method can not take into consideration the dynamic effects of the impulse loading generated in FWD testing, as well as the viscoelastic behaviour of asphalt concrete (AC). Therefore, the layer properties backcalculated from the static approach and the pavement responses computed using these layer properties are questionable. In this study, FWD tests were conducted on two asphalt pavements, one with a flexible base and the other with a semi-rigid base. The field FWD data were backcalculated using the traditional static approach and the dynamic approach which uses the spectral element method as the forward analysis engine. The elastic modulus of each layer was obtained from the static backcalculation, while in the dynamic backcalculation, the complex modulus master curve, which is the fundamental property of viscoelastic materials, was obtained for each AC layer, and elastic moduli were obtained for other layers. The two sets of backcalculated results were employed to analyze pavement responses to moving vehicular loading using the LET and layered viscoelastic theory, respectively. The results show that responses from the viscoelastic analyses are significantly larger than those from the elastic analyses except for the vertical strain at the asphalt treated base layer at high speeds. At a low speed of 16 km/h, most of the responses from the viscoelastic analyses are more than two times those from the elastic analyses. The results presented in this study pose a serious concern over the traditional approach in which both the backcalculation of FWD data and computation of pavement response to traffic loading are based on the LET.

Asphalt pavement modulus backcalculation using surface deflections under moving loads

Backcalculation of Damage Density of In‐service Asphalt Pavements Using Artificial Intelligence‐based Finite Element Model Updating

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Determination of Complex Modulus Gradients of Flexible Pavements Using Falling Weight Deflectometer and Artificial Intelligence

Backcalculation of Elastic Moduli of Asphalt Surface Course Based on Asphalt Surface Curvature Index

Fast Calculation Method for Mechanical Response at the Surface of Asphalt Pavement under an Elliptical Load

A Parameter Back-Calculation Technique for Pavements under Moving Loads

Back-calculation Research of Pavement Structure Modulus Based on Dynamic Deflection Analysis

Accuracy Evaluation of Statically Backcalculated Layer Properties of Asphalt Pavements from Falling Weight Deflectometer Data

Effect of nonlinear stress-dependency and cross-anisotropy on the backcalculation outputs from the TSD deflection slopes and the effect on estimated pavement performance

Effectiveness of Static and Dynamic Backcalculation Approaches for Asphalt Pavement

Back-Calculation of the Moduli of Asphalt Pavement Layer Using Accelerated Pavement Testing Data

Novel Method for Backcalculation of Asphalt Pavement Moduli

Characteristics of High-speed Deflection Basin and Structural Parameter Back-calculation of Asphalt Pavement with Different Structural States

Dynamic Backcalculation of Asphalt Pavement Layer Properties Using Spectral Element Method

Backcalculation of subgrade resilient modulus using deflection basin

A Method for Evaluating CRCP Performance Based on Edge-Loaded FWD Test

Modeling and validation of impact forces for back‐calculation of pavement surface moduli

Back-calculation study on asphalt pavement using dynamic viscoelastic method

Comparisons of Asphalt Pavement Responses Computed Using Layer Properties Backcalculated from Dynamic and Static Approaches

Modulus Backcalculation Methodology Based on Full-Scale Testing Road and Its Rationality and Feasibility Analysis