An effective self-supervised learning method for attenuating various types of seismic noise

Shijun Cheng,Zhiyao Cheng,Chao Jiang,Weijian Mao,Qingchen Zhang

DOI: https://doi.org/10.1190/geo2023-0656.1

IF: 3.264

2024-10-18

Geophysics

Abstract:GEOPHYSICS, Volume 89, Issue 6, Page V589-V604, November-December 2024.

geochemistry & geophysics

What problem does this paper attempt to address?

Self-Noise Suppression for AUV without Clean Data: a Noise2Noise Approach

Weiyang Zhou,Jianlong Li

DOI: https://doi.org/10.1109/UT49729.2023.10103424

2023-01-01

Abstract:The passive detection performance of an autonomous underwater vehicle (AUV) is affected by various types of noise. One of the main components of the noise is the AUV's self-noise. Inspired by the statistical reasoning shown in Noise2Noise, we propose a deep learning model for AUV's self-noise suppression. It can learn the spectrum features of the noise from single-channel data in a self-supervised learning setting and reconstruct clean signals. The tests on South China Sea experimental dataset show that the model is able to intelligently suppress AUV's self-noise for single hydrophone signals.
An effective self-supervised learning method for various seismic noise attenuation

Shijun Cheng,Zhiyao Cheng,Chao Jiang,Weijian Mao,Qingchen Zhang

2023-11-04

Abstract:Faced with the scarcity of clean label data in real scenarios, seismic denoising methods based on supervised learning (SL) often encounter performance limitations. Specifically, when a model trained on synthetic data is directly applied to field data, its performance would drastically decline due to significant differences in feature distributions between the two. To address this challenge, we develop an effective self-supervised strategy. This strategy, while relying on a single denoising network model, adeptly attenuates various types of seismic noise. The strategy comprises two main phases: 1. The warm-up phase. By using prior knowledge or extracting information from real data, we introduce additional noise to the original noisy data, constructing a noisier data with intensified noise. This data serves as the input, with the original noisy data acting as pseudo-labels. This facilitates rapid pre-training of the network to capture a certain noise characteristics and boosts network stability, setting the stage for the subsequent phase. 2. Iterative data refinement (IDR) phase. During this phase, we use the predictions of the original noisy data from the network trained in the previous epoch as the pseudo-labels. We continue to add noise to the predictions, creating a new noisier-noisy dataset for the current epoch of network training. Through this iterative process, we progressively reduce the discrepancy between the original noisy data and the desired clean data. Ultimately, the network's predictions on the original noisy data become our denoised results. Validations under scenarios with random noise, backscattered noise, and blending noise reveal that our method not only matches the traditional SL techniques on synthetic data but significantly outperforms them on field data.

Geophysics
Residual Learning of Deep Convolutional Neural Network for Seismic Random Noise Attenuation

Feng Wang,Shengchang Chen

DOI: https://doi.org/10.1109/lgrs.2019.2895702

IF: 5.343

2019-01-01

IEEE Geoscience and Remote Sensing Letters

Abstract:Over the last decades, seismic random noise attenuation has been dominated by transform-based denoising methods over the last decades. However, these methods usually need to estimate the noise level and select an optimal transformation in advance, and they may generate some artifacts in the denoising result (e.g., nonsmooth edges and pseudo-Gibbs phenomena). To overcome these disadvantages, we trained a deep convolutional neural network (CNN) with residual learning for seismic data denoising. We used synthetic seismic data for network training rather than seismic images, and we adopted a method to preprocess the seismic data before it was inputted in the network to help network training. We demonstrate the performance of the deep CNN in seismic random noise attenuation based on the synthetic seismic data. Results of numerical experiments show that our network adaptively and effectively suppresses noise of different levels and exhibits a competitive performance in comparison with the traditional transform-based methods.
Using Data‐Regrouping Methods to Attenuate Shot‐to‐Shot Coherent Interference Noise in Marine Seismic Data

Honglei Shen,Thomas Elboth,Chunhui Tao,Gang Tian,Hanchuang Wang,Lei Qiu,Jianping Zhou

DOI: https://doi.org/10.1029/2018ea000485

IF: 3.68

2019-01-01

Earth and Space Science

Abstract:Abstracts Unwanted interference noise often causes problems during seismic reflection data acquisition and processing. In this paper we present two novel data‐regrouping methods that enable improved shot‐to‐shot coherent interference noise attenuation in marine seismic data. The two approaches are based on line mixing and/or shot skipping: (1) for a 3‐D marine seismic reflection data acquisition which is typically carried out by shooting closely spaced parallel lines, we propose to mix the shot gathers from two adjacent sail lines to break up shot‐to‐shot coherent noise. This approach takes advantage of the fact that adjacent sail lines are usually acquired with a significant time interval, resulting in different types of noise; (2) for a 2‐D/3‐D acquisition, we propose an algorithm to skip and reorder the original shots to decrease the continuity of the shot‐to‐shot coherent noise. This approach could also supply more aperture data for the first or last shot from both sides, which is beneficial for the coherent noise removal at the edge area. After regrouping the original data, the coherent noise can then be further randomized or isolated by sorting and transforming to other domains, typically the common p‐shot domain where a random noise attenuation tool could be applied to identify and attenuate such noise. Field data examples confirm the effectiveness of the methods.
Self-Supervised Attenuation Method Based on Similarity Comparisons for 3D Seismic Random Noise

Jian Gao,Yixuan Gao,Wanyue Gao

DOI: https://doi.org/10.1109/access.2024.3406917

IF: 3.9

2024-06-04

IEEE Access

Abstract:The improvement of the signal-to-noise ratio of seismic data is crucial for high-precision processing. The self-supervised denoising methods based on correlation differences are gaining attention due to their low cost of training data construction and the ability to build training data directly on test data. However, as the volume of data processed increases, these methods must maintain a denoising effect by adding extra processings. This increase in processing times can lead to a rise in total cost, making these methods less cost-effective compared to other deep learning methods for processing large data. Therefore, we improved these self-supervised methods by altering the training data construction process, thereby retaining its cost advantage. Specifically, we modified the selection process of zones used for training data construction. Through correlation analysis, these methods can obtain higher-quality zones from the original zone for training, indicating that the network needs to be trained only once to process any data in the original zone. Without the requirement for additional processing to ensure noise attenuation, these self-supervised methods can maintain their cost advantage when processing large data. We applied one of these self-supervised methods to synthetic and field examples to demonstrate the enhancement's effectiveness. Experimental results show that the improved method performs as well as the conventional self-supervised method in suppressing random noise and constructing reflection events but with a significant cost advantage.

computer science, information systems,telecommunications,engineering, electrical & electronic
SelfMixed: Self-supervised mixed noise attenuation for distributed acoustic sensing data

Zitai Xu,Bangyu Wu,Yisi Luo,Liuqing Yang,Yangkang Chen

DOI: https://doi.org/10.1190/geo2023-0640.1

IF: 3.264

2024-08-23

Geophysics

Abstract:GEOPHYSICS, Volume 89, Issue 5, Page V415-V436, September-October 2024.

geochemistry & geophysics
Attenuating Random Noise in Seismic Data by a Deep Learning Approach

Xing Zhao,Ping Lu,Yanyan Zhang,Jianxiong Chen,Xiaoyang Li

DOI: https://doi.org/10.48550/arXiv.1910.12800

2019-10-29

Abstract:In the geophysical field, seismic noise attenuation has been considered as a critical and long-standing problem, especially for the pre-stack data processing. Here, we propose a model to leverage the deep-learning model for this task. Rather than directly applying an existing de-noising model from ordinary images to the seismic data, we have designed a particular deep-learning model, based on residual neural networks. It is named as N2N-Seismic, which has a strong ability to recover the seismic signals back to intact condition with the preservation of primary signals. The proposed model, achieving with great success in attenuating noise, has been tested on two different seismic datasets. Several metrics show that our method outperforms conventional approaches in terms of Signal-to-Noise-Ratio, Mean-Squared-Error, Phase Spectrum, etc. Moreover, robust tests in terms of effectively removing random noise from any dataset with strong and weak noises have been extensively scrutinized in making sure that the proposed model is able to maintain a good level of adaptation while dealing with large variations of noise characteristics and intensities.

Machine Learning,Computer Vision and Pattern Recognition,Image and Video Processing
Unsupervised Deep Learning for Random Noise Attenuation of Seismic Data

Bin Liu,Jinghang Yue,Zhiwu Zuo,Xinji Xu,Chao Fu,Senlin Yang,Peng Jiang

DOI: https://doi.org/10.1109/lgrs.2021.3057631

IF: 5.343

2022-01-01

IEEE Geoscience and Remote Sensing Letters

Abstract:Random noise attenuation is an essential step to improve the signal-to-noise ratio (SNR) of seismic data. Deep learning for seismic data denoising is dominated by supervised methods that require noise-free data as training targets. It is usually time-consuming and laborious to obtain such clean seismic data, and the effectiveness of the noise attenuation is difficult to be guaranteed. Therefore, we propose a novel unsupervised learning method that learns from noisy data. The method is based on two salient features of seismic data: 1) valid signals of adjacent seismic traces that are spatially correlated and 2) random noise that is spatially independent and unpredictable. An end-to-end deep convolutional neural network (CNN) was constructed to solve the denoising task. Adjacent traces of seismic data, which contain similar seismic phases and interface features, were used as the inputs and labels of the training set. The mapping of spatial correlation can be learned by the CNN so that valid signals from raw seismic data are predicted, while random noise is suppressed for unpredictability. Synthetic and field data were applied to the proposed CNN denoising model. The experimental results demonstrate the effectiveness of random noise attenuation while preserving amplitude compared with two commonly used state-of-the-art denoising methods.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Seismic Noise Attenuation Using Unsupervised Sparse Feature Learning

Mi Zhang,Yang Liu,Min Bai,Yangkang Chen

DOI: https://doi.org/10.1109/tgrs.2019.2928715

IF: 8.2

2019-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Noise attenuation plays an important role in seismic data processing. We propose a novel denoising method for seismic data based on unsupervised sparse feature learning. Our goal is to obtain the identifiable feature of the noisy seismic data and then to represent the effective signals. By preprocessing the raw data and training the autoencoder neural network with sparse constraint, the sparse feature of the seismic data can be learned and stored in the neural network. We use the adaptive moment estimation as a backpropagation algorithm to minimize the cost function with a sparse penalty term and combine the dropout technique in the training process to improve the feature extraction and generalization capability of the neural network. Then, the test data set can be reconstructed by the most important sparse features. The final denoising result can be obtained by rearranging the output test data set. Compared with three commonly used state-of-the-art denoising methods, the proposed method performs well in applications to denoising for synthetic and real seismic data.
Adaptive Convolutional Filter for Seismic Noise Attenuation

Junheng Peng,Yong Li,Yingtian LIu,Mingwei Wang,Huating Li

2024-10-25

Abstract:Seismic exploration is currently the most mature approach for studying subsurface structures, yet the presence of noise greatly restricts its imaging accuracy. Previous methods still face significant challenges: traditional computational methods are often computationally complex and their effectiveness is hard to guarantee; deep learning approaches rely heavily on datasets, and the complexity of network training makes them difficult to apply in practical field scenarios. In this paper, we proposed a method that has only 2464 learnable parameters, and its parameter constraints rely on priors rather than requiring training data. The three priors we proposed can effectively attenuate random noise while significantly reducing signal leakage, ensuring that the separated noise remains as independent as possible from the processed data. We validated our method on National Petroleum Reserve-Alaska Survey, and the results indicate that our proposed approach effectively enhances noise elimination and seismic data resolution.

Geophysics
Self-Supervised Seismic Swell Noise Suppression From Noisy Seismic Data

Weiwei Xu,Vincenzo Lipari,Paolo Bestagini,Wenchao Chen,Stefano Tubaro

DOI: https://doi.org/10.1109/tgrs.2024.3497163

IF: 8.2

2024-11-29

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Seismic swell noise, often observed in marine seismic data, is characterized by high amplitude and low frequencies. This noise significantly hides useful signals, underscoring the importance of attenuating it in the processing pipeline for marine seismic data. To date, most deep learning methods proposed for swell noise suppression have focused on supervised paradigms, which require a large dataset of paired noisy and clean data to gain insights into signal features and swell noise statistics at the training phase. In field data processing, however, obtaining generalizable training data often proves to be challenging. The inherent complexity and variability of the real world often make it difficult to acquire unbiased, noise-free datasets in the context of marine seismic data processing. To address this problem, we present a self-supervised deep learning method for suppressing swell noise even in the absence of access to clean seismic training data. First, we propose a strategy for the synthetic swell noise generation based on the amplitude, frequency, and coherence features of noisy traces. We implement the noisy-as-clean (NAC) strategy, wherein either the original noisy seismic data or its reorganized variant acts as the network's target. Simultaneously, the network receives the observed noisy seismic data combined with simulated swell noise as its input. By leveraging these "noisy-noisy" pairs, we train a DnCNN network. Experimental evaluations conducted on both synthetic and field data demonstrate that, through the integration of swell noise simulation and the NAC strategy, the trained network consistently achieves superior denoising performance.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
A self-supervised scheme for ground roll suppression

Sixiu Liu,Claire Birnie,Andrey Bakulin,Ali Dawood,Ilya Silvestrov,Tariq Alkhalifah

2023-10-21

Abstract:In recent years, self-supervised procedures have advanced the field of seismic noise attenuation, due to not requiring a massive amount of clean labeled data in the training stage, an unobtainable requirement for seismic data. However, current self-supervised methods usually suppress simple noise types, such as random and trace-wise noise, instead of the complicated, aliased ground roll. Here, we propose an adaptation of a self-supervised procedure, namely, blind-fan networks, to remove aliased ground roll within seismic shot gathers without any requirement for clean data. The self-supervised denoising procedure is implemented by designing a noise mask with a predefined direction to avoid the coherency of the ground roll being learned by the network while predicting one pixel's value. Numerical experiments on synthetic and field seismic data demonstrate that our method can effectively attenuate aliased ground roll.

Geophysics
Self-Supervised Seismic Random Noise Attenuation With Spatial Attention From a Single Section

Zhonghan Zhang,Guihe Qin,Minghui Sun,Yanhua Liang,Jie Yan

DOI: https://doi.org/10.1109/tgrs.2023.3294219

IF: 8.2

2023-07-26

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Seismic data denoising has gained much attention from scholars as a crucial part of seismic data processing. With the development of deep learning technology, numerous algorithms well employed in natural image denoising have been used for seismic data denoising. However, seismic data are crucially an array of geophone vibration signals, which have numerous unique structural properties compared with natural images. Thus, employing the traditional image algorithms rather than those developed specifically for seismic data is inadequate to extract all seismic features. In addition, compared with natural images, it is difficult to acquire noise-free ground truth, which restricts the use of supervised deep learning approaches in seismic data denoising. To this end, a self-supervised intertrace seismic data denoising network (STSNet) that requires only one seismic section for random noise attenuation is proposed. Furthermore, we adopt a single-trace vibration signal as the basic unit and fully consider the characteristics of seismic signals. This is the first time to introduce a self-learning spatial attention mechanism among seismic traces to focus on the noise components, which prompts the network's fitting performance. Different comparative experiments demonstrate that our approach can achieve exceptional denoising performance even if only observing a single seismic section. In addition, the ablation experiments also confirm the efficiency of spatial attention.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
An Adaptive Time-Frequency Denoising Method for Suppressing Source-Related Seismic Strong Noise

Hao Zhang,Jidong Yang,Jianping Huang,Weiqi Wang

DOI: https://doi.org/10.1109/tgrs.2024.3369877

IF: 8.2

2024-03-12

IEEE Transactions on Geoscience and Remote Sensing

Abstract:The presence of source-related noise, characterized by exceptionally large amplitudes, poses a significant challenge in seismic data processing, impeding the accurate recovery of the effective signal within overlapping regions. In response, we introduce an adaptive time-frequency denoising method tailored to mitigate this issue. First, the seismic data is horizontally sorted, and exponential function fittings are applied to exploit amplitude difference information embedded in the dataset. Then, the curvatures of the exponential functions are computed, and their maximal values are chosen to establish a dynamic threshold curve, offering an estimate for the range of abnormal traces from shallow to deep regions. Next, further refinement of the dynamic threshold curve involves iterative adjustments based on the standard deviation of the curvature functions, resulting in a more precise separation between signal and noise traces. Finally, leveraging the optimized dynamic threshold curve, adaptive threshold value computations are performed at each frequency slice and subsequently applied through soft thresholding to effectively reduce the impact of strong amplitude noise. Numerical examples involving synthetic and field data demonstrate the effectiveness of the proposed method in attenuating strong source-related noise, surpassing the performance of traditional f-k filter, nonconvex (NC) threshold, and static threshold methods.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Unsupervised Seismic Random Noise Attenuation Based on Deep Convolutional Neural Network

Mi Zhang,Yang Liu,Yangkang Chen

DOI: https://doi.org/10.1109/access.2019.2959238

IF: 3.9

2019-01-01

IEEE Access

Abstract:Random noise attenuation is one of the most essential steps in seismic signal processing. We propose a novel approach to attenuate seismic random noise based on deep convolutional neural network (CNN) in an unsupervised learning manner. First, normalization and patch sampling are required to build training dataset and test dataset from raw noisy data. Instead of using synthetic noise-free data or denoised results via conventional methods as training labels, we adopt only the training set constructed from the raw noisy data as the input and design a robust deep CNN that just relies on the noisy input to learn the hidden features. The cross-entropy is chosen as the error criterion for establishing the cost function, which is minimized by the back-propagation algorithm to obtain the optimized parameters of the network. Then, we can reconstruct all patches of the test dataset via the optimized CNN. After patching processing and inverse normalization, the final denoised result can be obtained from reconstructed patches. Experimental tests on synthetic and real data demonstrate the effectiveness and superiority of the proposed method compared with state-of-the-art denoising methods.
Unsupervised 3-D Random Noise Attenuation Using Deep Skip Autoencoder

Liuqing Yang,Shoudong Wang,Xiaohong Chen,Omar M. Saad,Wei Chen,Yapo Abolé Serge Innocent Oboué,Yangkang Chen,Yapo Abole Serge Innocent Oboue

DOI: https://doi.org/10.1109/tgrs.2021.3100455

IF: 8.2

2022-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Effective random noise attenuation is critical for subsequent processing of seismic data, such as velocity analysis, migration, and inversion. Thus, the removal of seismic random noise with an uncertainty level is meaningful. Attenuating 3-D random noise in a supervised way based on deep learning (DL) is challenging because clean labels are difficult to obtain. Therefore, it is necessary to develop an adaptive unsupervised-based method for random noise attenuation. In this article, we propose a deep-denoising unsupervised learning (DDUL) network to attenuate random noise in 2-D/3-D seismic data. A patching technique is used to split 2-D/3-D seismic data into several patches to be fed into the network, which helps to expand the number of samples for training. We use the fully symmetrical structure of the autoencoder to construct the network. In each corresponding encoder and decoder layer, skip connections are added to enhance the learning of seismic data features. We construct three blocks to extract waveform features in seismic data, i.e., encoder, decoder, and skip blocks. Among them, the skip is connected between the encoder and decoder blocks of each hidden layer. The use of multiple blocks not only improves the network's ability to extract seismic data features but also solves the problem of excessive training parameters caused by hidden layer stacking. Five 2-D/3-D synthetic and field seismic datasets are used to test the denoising performance of our proposed method. The denoising results demonstrate that our proposed method has good signal-preserving and noise attenuation capabilities in real-world applications.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Improving the Signal‐to‐Noise Ratio of Seismological Datasets by Unsupervised Machine Learning

Yangkang Chen,Mi Zhang,Min Bai,Wei Chen

DOI: https://doi.org/10.1785/0220190028

2019-01-01

Seismological Research Letters

Abstract:Seismic waves that are recorded by near-surface sensors are usually disturbed by strong noise. Hence, the recorded seismic data are sometimes of poor quality; this phenomenon can be characterized as a low signal-to-noise ratio (SNR). The low SNR of the seismic data may lower the quality of many subsequent seismological analyses, such as inversion and imaging. Thus, the removal of unwanted seismic noise has significant importance. In this article, we intend to improve the SNR of many seismological datasets by developing new denoising framework that is based on an unsupervised machine-learning technique. We leverage the unsupervised learning philosophy of the autoencoding method to adaptively learn the seismic signals from the noisy observations. This could potentially enable us to better represent the true seismic-wave components. To mitigate the influence of the seismic noise on the learned features and suppress the trivial components associated with low-amplitude neurons in the hidden layer, we introduce a sparsity constraint to the autoencoder neural network. The sparse autoencoder method introduced in this article is effective in attenuating the seismic noise. More importantly, it is capable of preserving subtle features of the data, while removing the spatially incoherent randomnoise. We apply the proposed denoising framework to a reflection seismic image, depth-domain receiver function gather, and an earthquake stack dataset. The purpose of this study is to demonstrate the framework's potential in real-world applications.
Adaptive dual-domain filtering for random seismic noise removal

Shuaishuai Li,Xiaotong Zhang,Jiangjie Zhang,Linong Liu

DOI: https://doi.org/10.1190/geo2023-0532.1

IF: 3.264

2024-07-26

Geophysics

Abstract:GEOPHYSICS, Volume 89, Issue 5, Page V377-V394, September-October 2024.

geochemistry & geophysics
Regularized deep learning for unsupervised random noise attenuation in poststack seismic data

Chengyun Song,Shutao Guo,Chuanchao Xiong,Jiying Tuo

DOI: https://doi.org/10.1093/jge/gxad094

2023-11-15

Journal of Geophysics and Engineering

Abstract:Deep learning methods achieve excellent noise reduction performances in seismic data processing compared with traditional methods. However, deep learning usually requires a large number of pairwise noisy-clean training data, which is an extremely challenging task. In this paper, an unsupervised approach without clean seismic data is proposed to suppress random noise. Seismic data is divided into odd and even traces, which serve as the input and output of the depth network. So that the proposed algorithm can be trained directly on the original data. What is more, the proposed method introduces two regularization terms to solve the over-smoothing problem caused by reconstruction of adjacent traces. The first term considers an ideal denoising network that does not cause oversmooth as a constraint, while the second term considers the structural information existing in seismic data. Experiments on synthetic post-stack data illustrate that the proposed method obtain the higher SNR than the comparison methods. In the application of field post-stack seismic data, the proposed method can effectively maintain the seismic amplitude and generate good spectral characteristics.

geochemistry & geophysics
Seismic Interference Noise Attenuation by Convolutional Neural Network Based on Training Data Generation.

Pengcheng Xu,Wenkai Lu,Benfeng Wang

DOI: https://doi.org/10.1109/lgrs.2020.2982323

IF: 5.343

2021-01-01

IEEE Geoscience and Remote Sensing Letters

Abstract:External source interference noise (ESIN) is a common kind of noise in marine seismic data acquisition. According to the noise-to-signal ratio (NSR), a shot gather can be divided into a low NSR part and a high NSR part. The existing ESIN attenuation methods work well in high NSR parts of shot gathers. However, because the signals in low NSR parts are much stronger than ESINs, these methods cannot suppress the ESINs in low NSR parts, and they usually damage the signals. In this letter, we propose a deep-learning method to suppress the ESINs in low NSR parts based on a convolutional neural network (CNN). The end-to-end fully convolutional network needs labeled training samples; however, the real data are unlabeled, i.e., the ESINs in low NSR parts are unknown. To obtain the labeled training data, we propose a sample generation method based on real data. The ESINs in high NSR parts extracted by the traditional methods and the signals of the clean shot gathers are added together to synthesize training samples. We then use the synthesized data and its ESINs to train the network. The experiments prove that the proposed method can suppress the ESINs in low NSR parts properly and protect the signals as well.

An effective self-supervised learning method for attenuating various types of seismic noise

Self-Noise Suppression for AUV without Clean Data: a Noise2Noise Approach

An effective self-supervised learning method for various seismic noise attenuation

Residual Learning of Deep Convolutional Neural Network for Seismic Random Noise Attenuation

Using Data‐Regrouping Methods to Attenuate Shot‐to‐Shot Coherent Interference Noise in Marine Seismic Data

Self-Supervised Attenuation Method Based on Similarity Comparisons for 3D Seismic Random Noise

SelfMixed: Self-supervised mixed noise attenuation for distributed acoustic sensing data

Attenuating Random Noise in Seismic Data by a Deep Learning Approach

Unsupervised Deep Learning for Random Noise Attenuation of Seismic Data

Seismic Noise Attenuation Using Unsupervised Sparse Feature Learning

Adaptive Convolutional Filter for Seismic Noise Attenuation

Self-Supervised Seismic Swell Noise Suppression From Noisy Seismic Data

A self-supervised scheme for ground roll suppression

Self-Supervised Seismic Random Noise Attenuation With Spatial Attention From a Single Section

An Adaptive Time-Frequency Denoising Method for Suppressing Source-Related Seismic Strong Noise

Unsupervised Seismic Random Noise Attenuation Based on Deep Convolutional Neural Network

Unsupervised 3-D Random Noise Attenuation Using Deep Skip Autoencoder

Improving the Signal‐to‐Noise Ratio of Seismological Datasets by Unsupervised Machine Learning

Adaptive dual-domain filtering for random seismic noise removal

Regularized deep learning for unsupervised random noise attenuation in poststack seismic data

Seismic Interference Noise Attenuation by Convolutional Neural Network Based on Training Data Generation.