Abstract:The processes of cathodic reduction of U(III) ions to metal in a low–melting LiCl–KCl–CsCl eutectic at the temperature range 650–850 K on tungsten, gallium and cadmium electrodes in an inert gas atmosphere have been studied by non-stationary and stationary electrochemical methods. Reagents without contain impurities of moisture, oxygen and their compounds were used in the experiments. All major operations were performed in a dry glove box. The following methods were used to analyze the electrochemical processes: cyclic voltammetry, square-wave voltammetry and potentiometry at zero current. On cyclic voltammogram of the molten LiCl–KCl–CsCl–UCl3 solution on an inert tungsten electrode, one cathode current peak corresponding to the deposition of metallic uranium and one anode current peak associated with its dissolution were recorded. It was found that the potential of the cathode peak was shifted to a region of more negative values with an increase of the scan rate. The value of the cathode peak current was directly proportional vs. the square root of the polarization rate, but this dependence does not pass through the origin. Consequently, the system of U(III)/U(0) couple was irreversible and proceeds in one stage. It was found that on square-wave voltammograms in the studied “electrochemical window” the deposition of uranium on liquid reactive gallium and cadmium electrodes was carried out at more positive values than on inert tungsten electrode. It was established that this potential shift was associated with the formation of intermetallic compounds of uranium with the material of reactive electrodes. The values of the alloy formation potentials were determined. For identification of the composition of cathode deposits, potentiostatic electrolysis was performed. By X–ray diffraction analysis, it was found that the formation of the intermetallic compounds Ga3U and Ga2U occurs on the gallium reactive electrode, and Cd11U occurs on the cadmium one. The conditions of their formation during the electrolysis of molten LiCl–KCl–CsCl–UCl3 solutions were established. The reaction of the electrochemical extraction of uranium from molten LiCl–KCl–CsCl–UCl3 electrolyte was investigated on liquid reactive electrodes at different duration of electrolysis. It was found that the electrochemical extraction of uranium exceeds 97% on both Ga and Cd electrodes.

Electrochemical behavior and electromotive force measurements of U3+/U0 in molten MgCl2-NaCl

Electrochemical behavior of magnesium ions in chloride melt

ELECTROCHEMICAL SYNTHESIS OF INTERMETALLIC U–Ga AND U–Cd COMPOUNDS IN MOLTEN LiCl–KCl–CsCl EUTECTIC

Adding MgCl2 to Molten NaCl‐UCl n (n=3, 4): Insights from First Principles Molecular Dynamics

Thermodynamic and Kinetic Properties of Mg(II) in LiCl-KCl Melt and the Formation of Zn-Mg Alloy on Liquid Zn Electrode

Electrochemical Behavior and Reduction of UO22+ in LiCl-KCl Molten Salt

The Electrode Kinetics of UCl3 in LiCl-KCl Molten Salt

Molecular dynamics simulations of structural and transport properties of molten NaCl-UCl3 using the polarizable-ion model

Electrochemical Study of OH - in Molten MgCl 2 -NaCl-KCl Salts

Cathode processes and uranium electrochemical extraction on W and Ga electrodes in LiCl–KCl melt

Unraveling fundamental characteristics of Na2Mg3Cl8 as a solid-state electrolyte for Na-ion batteries

Studies on the Electrodeposition of UO 2 Production in UO 2 Cl 2 -LiCl-KCl Melt

Electrochemistry of Uranium on Liquid Cadmium Electrode in LiCl-KCl Eutectic

High temperature UCl3 synthesis in molten salt mixtures via reaction of U metal with iron chlorides

Effect of Chloride Ions on the Electrochemical Performance of Magnesium Metal‐Organic‐Frameworks‐based Semi‐Solid Electrolytes.

Electrochemical Behavior of Neodymium and Formation of Mg–Nd Alloys in Molten Chlorides

Electrochemical measurement of the corrosion rates of structural materials in molten NaCl–MgCl 2 at 580°C

Rare Earth Chlorides in Low-Hydration Magnesium Chloride Electrolysis: Mechanistic Insights

Electrochemical formation of Mg–Li alloys at solid magnesium electrode from LiCl–KCl melts

Study on the electrochemical behavior of Mg and Al ions in LiCl-KCl melt and preparation of Mg-Al alloy

Electrochemical recovery of UO2 from LiCl-KCl-UO2F2 molten salt