Abstract:Li[sbnd]Mg and Li[sbnd]Zn alloy electrodes are prepared by the kinetically controlled vapour deposition (KCVD) of Li[sbnd]Mg and Li[sbnd]Zn alloys on a temperature-controlled substrate. The mode of preparation greatly influences the microstructure, surface morphology and electrochemical properties of these Li[sbnd]Mg and Li[sbnd]Zn alloys. The KCVD technique, as applied to the generation of Li-Mg alloys, establishes the composition of each prepared alloy by independently varying the temperature of the molten lithium, the temperature of a solid magnesium surface with which the lithium interacts, and the temperature of the substrate on which a resulting intimately mixed Li-Mg mixture is deposited. Here, the required temperature for lithium induced magnesium vaporization is more than 200°C below the magnesium melting point. The effect of variable temperature control on the microstructure, morphology and electrochemical properties of the vapour-deposited alloys has been studied and the diffusion coefficients for lithium in the Li[sbnd]Mg alloy electrodes prepared by the KCVD method are found to be in the range 1.2–5.2 × 10−7 cm2/s−1 at room temperature. The diffusion coefficients for moderate lithium content alloys, firstly, exceed those for standard alloy preparation and, secondly, are two to three orders of magnitude larger than those for other lithium alloy systems (e.g. 6.0 × 10−10cm2 s−1 in LiA1). A variant of the KCVD technique is used to generate highly porous Li[sbnd]Zn alloy films prepared by controlling the temperature of a molten lithium source and the rate at which a zinc source, placed in proximity to the lithium, equilibrates in temperature as the lithium interacts with the zinc. Diffusion coefficients for the Li[sbnd]Zn alloy electrodes prepared by this variant of the KCVD method vary from 10−7 to 10−9 cm2 s−1 at room temperature, depending on the alloy composition. This should be compared with the standard alloy whose diffusion coefficient never exceeds 109 cm2 s−1 for any composition. These observations suggest that alloys generated using kinetically controlled lithiation display an enhanced porosity and diffusivity useful for a number of applications.

Electrochemical formation of Mg–Li alloys at solid magnesium electrode from LiCl–KCl melts

Study on the electrochemical behavior of Mg and Al ions in LiCl-KCl melt and preparation of Mg-Al alloy

Electrochemical Codeposition of Mg–Li Alloys from a Molten KCl–LiCl–MgCl2 System

Thermodynamic and Kinetic Properties of Mg(II) in LiCl-KCl Melt and the Formation of Zn-Mg Alloy on Liquid Zn Electrode

Electrochemical Formation of Mg-Li-Ca Alloys by Codeposition of Mg, Li and Ca from LiCl-KCl-MgCl2-CaCl2 Melts.

Electrodeposition of aluminum–magnesium alloys from an aluminum-containing solvate ionic liquid at room temperature

Electrochemical preparation and properties of a Mg–Li–Y alloy via co-reduction of Mg( ii ) and Y( iii ) in chloride melts

Electrodeposition of magnesium–lithium–dysprosium ternary alloys with controlled components from dysprosium oxide assisted by magnesium chloride in molten chlorides

Corrosion Behavior of the Nickel Electrode in LiCl-KCl-MgCl2 Molten Salt in Ni-Mg Alloy formation process

A facile in situ Mg surface chemistry strategy for conditioning-free Mg[AlCl4]2 electrolytes

An efficient Hauser-base electrolyte for rechargeable magnesium batteries

Electrochemical Behavior of Neodymium and Formation of Mg–Nd Alloys in Molten Chlorides

Electrochemical behavior of magnesium ions in chloride melt

Generation of highly porous Li‒Mg and Li‒Zn alloys from kinetically controlled lithiation

Extending Cycle Life of Mg/S Battery by Activation of Mg Anode/Electrolyte Interface Through an LiCl‐Assisted MgCl2 Solubilization Mechanism

Understanding the Initial Stages of Reversible Mg Deposition and Stripping in Inorganic Non-Aqueous Electrolytes

Electrochemical Co-Reduction Extraction of Neodymium in LiCl-KCl-ZnCl2 Molten Salt System

The impact of magnesium content on lithium-magnesium alloy electrode performance with argyrodite solid electrolyte

Electrochemical Investigation of Li–Al Anodes in Oligo(ethylene Glycol) Dimethyl Ether/lipf 6

Dissolution Mechanism of Eutectic and Hypereutectic Mg-Sn Alloy Anodes for Magnesium Rechargeable Batteries

Revealing the Structural Evolution of Electrode/Electrolyte Interphase Formation during Magnesium Plating and Stripping with operando EQCM‐D