Abstract:Highlights • A conditioning-free electrolyte denoted as MLCH was prepared mainly based on all-inorganic salts. • The main equilibrium species in the MLCH electrolyte are [LiCl 2 (THF) 2 ] − and [Mg 2 (μ-Cl) 3 (THF) 6 ] + . • The conditioning-free characteristic of the MLCH electrolyte mainly originates from the synergistic effect of LiCl, CrCl 3 and HpMS. • The discharge specific capacity of a cus|MLCH|Mg cell is up to 215 mAh g −1 at 0.1 c. Conditioning-free electrolytes with high reversibility of Mg plating/stripping are of vital importance for the commercialization of the superior rechargeable magnesium batteries (RMBs). In the present work, a non-nucleophilic electrolyte (denoted as MLCH) based on all-inorganic salts of MgCl 2 , LiCl and CrCl 3 for RMBs is prepared by a straightforward one-step reaction. As a result, the MLCH electrolyte shows the noticeable performance of high ionic conductivity (3.40 mS cm −1 ), low overpotential (∼46 mV vs Mg/Mg 2+ ), high Coulombic efficiency (∼93%), high anodic stability (SS, ∼2.56 V vs Mg/Mg 2+ ) and long-term (more than 500 h) cycling stability, especially the conditioning-free characteristic. The main equilibrium species in the MLCH electrolyte are confirmed to be the tetracoordinated anions of [LiCl 2 (THF) 2 ] − and solvated dimers of [Mg 2 (μ-Cl) 3 (THF) 6 ] + . The addition of LiCl can assist the dissolution of MgCl 2 and activation of the electrode/electrolyte interface, resulting in a superior Mg plating/stripping efficiency. The synergistic effect of LiCl, CrCl 3 , a small amount of HpMS and the absence of polymerization THF enable the conditioning-free characteristic of the MLCH electrolyte. Moreover, the MLCH electrolyte exhibits decent compatibility with the cathodic materials of CuS. The Mg/CuS full cell using the MLCH electrolyte presents a discharge specific capacity of 215 mAh g −1 at 0.1 C and the capacity can retain ∼72% after 40 cycles. Notably, the MLCH electrolyte has other superiorities such as the broad sources of materials, low-cost and easy-preparation, leading to the potential prospect of commercial application.

Extending Cycle Life of Mg/S Battery by Activation of Mg Anode/Electrolyte Interface Through an LiCl‐Assisted MgCl2 Solubilization Mechanism

Tailoring Mg2+ Solvation Structure in a Facile All‐Inorganic [mgxliycl2x+y·nthf] Complex Electrolyte for High Rate and Long Cycle‐Life Mg Battery

Constructing Efficient Mg(CF3SO3)2 Electrolyte via Tailoring Solvation and Interface Chemistry for High‐Performance Rechargeable Magnesium Batteries

Strong solvent coordination effect inducing gradient solid-electrolyte-interphase formation for highly efficient Mg plating/stripping

Improving a Mg/S Battery with YCl3 Additive and Magnesium Polysulfide

A facile in situ Mg surface chemistry strategy for conditioning-free Mg[AlCl4]2 electrolytes

Synchronous Regulation on Solvation Structure and Interface Engineering to Enable Reversible Magnesium Metal Batteries

A Li/Mg Double‐Salt Strategy Based on Amine Solvent Achieves Bulk Phase‐Interface‐Electrode Multi‐Scale Optimization for Mg Metal Batteries

Tailoring Electrode–Electrolyte Interface Using an Electron‐Deficient Borate‐Based Additive in MgTFSI2‐MgCl2/DME Electrolyte for Rechargeable Magnesium Batteries

Toward High‐Performance Mg/S Batteries with M4‐Assisted Mg(AlCl4)2/PYR14TFSI/DME Electrolyte and MoS2@CMK/S Cathode

Stable Solid Electrolyte Interphase in Situ Formed on Magnesium‐Metal Anode by Using a Perfluorinated Alkoxide‐Based All‐Magnesium Salt Electrolyte

An efficient Hauser-base electrolyte for rechargeable magnesium batteries

Enhancing the Reversibility of Mg/S Battery Chemistry Through Li(+) Mediation.

Cosolvent‐Assisted Formation of Charged Ion‐Solvent Clusters and Solid Electrolyte Interphase for High‐Performance Magnesium Metal Batteries

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

Synergy of coordination and trace ionization from co-solvents enables reversible magnesium electroplating/stripping behavior

Reversible function switching of Ag catalyst in Mg/S battery with chloride-containing electrolyte

Influence of Chloride and Electrolyte Stability on Anode Passivation Layer Formation and its Dissolution in Mg Batteries Revealed by operando EQCM-D

Regulating solvation sheath by introducing multifunctional fluoride boronic esters for highly efficient magnesium stripping/plating

A non-nucleophilic electrolyte based on all-inorganic salts with conditioning-free characteristic for rechargeable magnesium batteries

Chloride-Free Electrolyte Based on Tetrabutylammonium Triflate Additive for Extended Anodic Stability in Magnesium Batteries