Abstract:Highlights • A conditioning-free electrolyte denoted as MLCH was prepared mainly based on all-inorganic salts. • The main equilibrium species in the MLCH electrolyte are [LiCl 2 (THF) 2 ] − and [Mg 2 (μ-Cl) 3 (THF) 6 ] + . • The conditioning-free characteristic of the MLCH electrolyte mainly originates from the synergistic effect of LiCl, CrCl 3 and HpMS. • The discharge specific capacity of a cus|MLCH|Mg cell is up to 215 mAh g −1 at 0.1 c. Conditioning-free electrolytes with high reversibility of Mg plating/stripping are of vital importance for the commercialization of the superior rechargeable magnesium batteries (RMBs). In the present work, a non-nucleophilic electrolyte (denoted as MLCH) based on all-inorganic salts of MgCl 2 , LiCl and CrCl 3 for RMBs is prepared by a straightforward one-step reaction. As a result, the MLCH electrolyte shows the noticeable performance of high ionic conductivity (3.40 mS cm −1 ), low overpotential (∼46 mV vs Mg/Mg 2+ ), high Coulombic efficiency (∼93%), high anodic stability (SS, ∼2.56 V vs Mg/Mg 2+ ) and long-term (more than 500 h) cycling stability, especially the conditioning-free characteristic. The main equilibrium species in the MLCH electrolyte are confirmed to be the tetracoordinated anions of [LiCl 2 (THF) 2 ] − and solvated dimers of [Mg 2 (μ-Cl) 3 (THF) 6 ] + . The addition of LiCl can assist the dissolution of MgCl 2 and activation of the electrode/electrolyte interface, resulting in a superior Mg plating/stripping efficiency. The synergistic effect of LiCl, CrCl 3 , a small amount of HpMS and the absence of polymerization THF enable the conditioning-free characteristic of the MLCH electrolyte. Moreover, the MLCH electrolyte exhibits decent compatibility with the cathodic materials of CuS. The Mg/CuS full cell using the MLCH electrolyte presents a discharge specific capacity of 215 mAh g −1 at 0.1 C and the capacity can retain ∼72% after 40 cycles. Notably, the MLCH electrolyte has other superiorities such as the broad sources of materials, low-cost and easy-preparation, leading to the potential prospect of commercial application.

A facile in situ Mg surface chemistry strategy for conditioning-free Mg[AlCl4]2 electrolytes

Strong solvent coordination effect inducing gradient solid-electrolyte-interphase formation for highly efficient Mg plating/stripping

Extending Cycle Life of Mg/S Battery by Activation of Mg Anode/Electrolyte Interface Through an LiCl‐Assisted MgCl2 Solubilization Mechanism

Improving Electrochemical Performance of Rechargeable Magnesium Batteries with Conditioning-Free Mg-Cl Complex Electrolyte

Surface Engineering of a Mg Electrode via a New Additive to Reduce Overpotential

A non-nucleophilic electrolyte based on all-inorganic salts with conditioning-free characteristic for rechargeable magnesium batteries

Constructing Efficient Mg(CF3SO3)2 Electrolyte via Tailoring Solvation and Interface Chemistry for High‐Performance Rechargeable Magnesium Batteries

Enabling Mg Metal Anodes Rechargeable in Conventional Electrolytes by Fast Ionic Transport Interphase

Efficient and Stable Magnesium Plating/Stripping in High-Capacity Novel Mg//Ni0.6Co0.4Se2 Batteries Enabled by Interfacial Chemistry Modulation

Synergy of coordination and trace ionization from co-solvents enables reversible magnesium electroplating/stripping behavior

Reducing Mg Anode Overpotential Via Ion Conductive Surface Layer Formation by Iodine Additive

Understanding the Initial Stages of Reversible Mg Deposition and Stripping in Inorganic Non-Aqueous Electrolytes

Superior plating/stripping performance through constructing an artificial interphase layer on metallic Mg anode

A Non-Nucleophilic Mono-Mg2+ Electrolyte for Rechargeable Mg/S Battery

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Reversible Magnesium Metal Anode Enabled by Cooperative Solvation/Surface Engineering in Carbonate Electrolytes

Electrochemical‐Conditioning‐Free and Water‐Resistant Hybrid AlCl3/MgCl2/Mg(TFSI)2 Electrolytes for Rechargeable Magnesium Batteries

Tailoring Mg2+ Solvation Structure in a Facile All‐Inorganic [mgxliycl2x+y·nthf] Complex Electrolyte for High Rate and Long Cycle‐Life Mg Battery

Building Organic–Inorganic Robust Interphases from Deep Eutectic Solution for Highly Stable Mg Metal Anode in Conventional Electrolyte

An efficient Hauser-base electrolyte for rechargeable magnesium batteries

Enhancing Reversibility and Stability of Mg Metal Anodes: High-Exposure (002) Facets and Nanosheet Arrays for Superior Mg Plating/Stripping