Abstract:Highlights • A conditioning-free electrolyte denoted as MLCH was prepared mainly based on all-inorganic salts. • The main equilibrium species in the MLCH electrolyte are [LiCl 2 (THF) 2 ] − and [Mg 2 (μ-Cl) 3 (THF) 6 ] + . • The conditioning-free characteristic of the MLCH electrolyte mainly originates from the synergistic effect of LiCl, CrCl 3 and HpMS. • The discharge specific capacity of a cus|MLCH|Mg cell is up to 215 mAh g −1 at 0.1 c. Conditioning-free electrolytes with high reversibility of Mg plating/stripping are of vital importance for the commercialization of the superior rechargeable magnesium batteries (RMBs). In the present work, a non-nucleophilic electrolyte (denoted as MLCH) based on all-inorganic salts of MgCl 2 , LiCl and CrCl 3 for RMBs is prepared by a straightforward one-step reaction. As a result, the MLCH electrolyte shows the noticeable performance of high ionic conductivity (3.40 mS cm −1 ), low overpotential (∼46 mV vs Mg/Mg 2+ ), high Coulombic efficiency (∼93%), high anodic stability (SS, ∼2.56 V vs Mg/Mg 2+ ) and long-term (more than 500 h) cycling stability, especially the conditioning-free characteristic. The main equilibrium species in the MLCH electrolyte are confirmed to be the tetracoordinated anions of [LiCl 2 (THF) 2 ] − and solvated dimers of [Mg 2 (μ-Cl) 3 (THF) 6 ] + . The addition of LiCl can assist the dissolution of MgCl 2 and activation of the electrode/electrolyte interface, resulting in a superior Mg plating/stripping efficiency. The synergistic effect of LiCl, CrCl 3 , a small amount of HpMS and the absence of polymerization THF enable the conditioning-free characteristic of the MLCH electrolyte. Moreover, the MLCH electrolyte exhibits decent compatibility with the cathodic materials of CuS. The Mg/CuS full cell using the MLCH electrolyte presents a discharge specific capacity of 215 mAh g −1 at 0.1 C and the capacity can retain ∼72% after 40 cycles. Notably, the MLCH electrolyte has other superiorities such as the broad sources of materials, low-cost and easy-preparation, leading to the potential prospect of commercial application.

A non-nucleophilic electrolyte based on all-inorganic salts with conditioning-free characteristic for rechargeable magnesium batteries

Cation Replacement Method Enables High-Performance Electrolytes for Multivalent Metal Batteries

An efficient Hauser-base electrolyte for rechargeable magnesium batteries

Electrochemical‐Conditioning‐Free and Water‐Resistant Hybrid AlCl3/MgCl2/Mg(TFSI)2 Electrolytes for Rechargeable Magnesium Batteries

Tailoring Mg2+ Solvation Structure in a Facile All‐Inorganic [mgxliycl2x+y·nthf] Complex Electrolyte for High Rate and Long Cycle‐Life Mg Battery

Constructing Efficient Mg(CF3SO3)2 Electrolyte via Tailoring Solvation and Interface Chemistry for High‐Performance Rechargeable Magnesium Batteries

A facile in situ Mg surface chemistry strategy for conditioning-free Mg[AlCl4]2 electrolytes

Chloride-Free Electrolyte Based on Tetrabutylammonium Triflate Additive for Extended Anodic Stability in Magnesium Batteries

Extending Cycle Life of Mg/S Battery by Activation of Mg Anode/Electrolyte Interface Through an LiCl‐Assisted MgCl2 Solubilization Mechanism

A Non-Nucleophilic Mono-Mg2+ Electrolyte for Rechargeable Mg/S Battery

The Metamorphosis of Mg(SO3CF3)2‐based Electrolytes for Rechargeable Magnesium Batteries

Hybrid MgCl2/AlCl3/Mg(TFSI)2 Electrolytes in DME Enabling High-Rate Rechargeable Mg Batteries

High‐Energy Interlayer‐Expanded Copper Sulfide Cathode Material in Non‐Corrosive Electrolyte for Rechargeable Magnesium Batteries

Strong solvent coordination effect inducing gradient solid-electrolyte-interphase formation for highly efficient Mg plating/stripping

Cosolvent‐Assisted Formation of Charged Ion‐Solvent Clusters and Solid Electrolyte Interphase for High‐Performance Magnesium Metal Batteries

Toward High‐Performance Mg/S Batteries with M4‐Assisted Mg(AlCl4)2/PYR14TFSI/DME Electrolyte and MoS2@CMK/S Cathode

Hybrid MgCl 2 /AlCl 3 /Mg(TFSI) 2 Electrolytes in DME Enabling High-Rate Rechargeable Mg Batteries

Regulating solvation sheath by introducing multifunctional fluoride boronic esters for highly efficient magnesium stripping/plating

Efficient boron-based electrolytes constructed by anionic and interfacial co-regulation for rechargeable magnesium batteries

Gel Polymer Electrolytes Based on Facile In Situ Ring‐Opening Polymerization Enabling High‐Performance Rechargeable Magnesium Batteries

Improving a Mg/S Battery with YCl3 Additive and Magnesium Polysulfide