Abstract:Hot work steels used as dies in metal forming processes must endure harsh conditions, typically achieved through a martensitic structure. However, retained austenite can persist after martensitic transformation, negatively impacting mechanical properties. Cryogenic treatment (CT) refines martensite, reduces retained austenite, and increases fine carbide density, thus enhancing performance. DIN 1.2888, a hot work tool steel with high cobalt content (~10%) and low carbon content (~0.2%), is less studied concerning the effects of CT. The objective of this study was to investigate how cryogenic treatment affects the mechanical and microstructural properties of DIN 1.2888 steel. Samples underwent conventional heat treatment (HT) and CT at -100, -140, and -180°C for 6 hours, followed by double tempering. Various analytical methods, including X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and Vickers Microhardness tests, were used to examine the samples. Wear mechanisms were evaluated through pin-on-disc tests under different loads, and impact toughness was measured both at room temperature and the working temperature of dies (350°C). Results indicated that lowering the cryogenic treatment temperature resulted in a slight increase in hardness values from 507HV for the heat-treated sample to 529HV for the sample treated at -180°C. Additionally, the impact toughness improved significantly, with values rising from 12.35J for the heat-treated sample to 23.44J at 350°C for the cryogenically treated sample at -180°C. Wear rates also decreased by approximately 50%, particularly at higher cryogenic treatment temperatures. The improvement in wear resistance was attributed to finer carbide precipitation and a more homogeneous distribution of carbides. These findings suggest that deep cryogenic treatment has a positive effect on DIN 1.2888 steel by decreasing retained austenite and increasing fine carbide density, leading to enhanced mechanical properties and extending the lifespan of the steel in die applications.

Nanoindentation Study of Borided Low-Carbon 16MnCr5 Steel

Investigation of the Effect of Tempering and Cryogenic Treatment on Mechanical Properties of Boron Steels

Examination of Wear and Rockwell-C adhesion Properties of Nitronic 50 Steel Coated with Pack Boriding Method

Determination of fracture toughness of boride layers grown on Co1.21Cr1.82Fe1.44Mn1.32Ni1.12Al0.08B0.01 high entropy alloy by nanoindentation

Effect of Diffusion Annealing and Aging Post-Treatments on Scratch Properties of Boride Layers on CoCrMo Alloy

Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5

Changes in Mechanical Properties of Ultrahigh Strength Nanostructured Steel Resulting from Repeated High Strain Rate Deformation

Effect of Boron Concentration in the Fe-Cr-Mo-(B,C) Hardfacing Alloys on the Microstructure and Mechanical Properties

Boronize Coatings Studied with a New Mass Transfer Model

Effect of Prior Boriding on Microstructure and Mechanical Properties of Nanobainitic X37CrMoV5-1 Hot-Work Tool Steel

Synthesis and Characterization of Nanocrystalline Boron-Nitride Thin Films by Ion Milling and Thermal Treatment for Tribological Coatings: An Approach to Quantifying the Growth Dynamic Process

Nano- and Microhardness Distribution in the Carburized Case of Nb-Microalloyed Gear Steel

The effect of ultra-fast surface hardening and strengthening on microstructure and mechanical properties of cast (9Cr–3Co–3W) heat-resistant steel

Enhanced Surface Hardness and Tribocorrosion Performance of 60niti by Boron Ion Implantation and Post-Annealing

Effects of deep cryogenic treatment on static mechanical properties of 18NiCrMo5 carburized steel

Effects of creep and oxidation on reduced modulus in high-temperature nanoindentation

Effect of Boronising on Mechanical Properties, Wear and Corrosion of N80 Steel

The Effect of Cryogenic Treatment on a High Co Bearing DIN 1.2888 Steel Used as Die in Hot Forging Process

Effect of Boronizing on the Corrosion Resistance of Martensitic Stainless Steels

Study on the Tribological Properties of DIN 16MnCr5 Steel after Duplex Gas-Nitriding and Pack Boriding

Enhancing surface properties of AISI P20 + Ni mold steel via boronizing: Evaluation of mechanical, tribological, and corrosion performance