Abstract:Turbulators, such as ribs, dimples, and pin-fins, play a vital role in the internal cooling efficiency of turbine blades. As a typical turbulator, various rib configurations using a uniform arrangement scheme have indicated high heat transfer enhancement but the friction loss is simultaneously subject to a great increase. In this work, a novel hierarchical arrangement scheme of ribs is developed aiming to improve the cooling efficiency. Adopting the uniform scheme as a baseline, the hierarchical scheme is implemented for six representative rib configurations (including transverse ribs, angled ribs, V-shaped ribs, inverted V-shaped ribs, M-shaped ribs, and inverted M-shaped ribs) and evaluated for its feasibility and generality. For different cooling designs, turbulent flow and heat transfer of the ribbed cooling channel are studied by three-dimensional numerical simulations based on the finite volume method with a constructed turbulence model. It is found that for all rib configurations, the hierarchical scheme can remarkably reduce the friction loss as desired, especially for the inverted V-shaped rib with a reduction of up to 50%. Due to the occurrence of flow separation, secondary flows offered by transverse ribs are characterized by a two-dimensional recirculation vortex behind the rib. For other rib configurations, secondary flows present a typical three-dimensional characteristic including the downwash flows along the inclined rib leg and the longitudinal vortices. The usage of the hierarchical scheme with small ribs strongly suppresses these secondary flows, which contributes to the significant decrease in form drag loss. Meanwhile, using the hierarchical scheme produces a slight heat transfer deterioration commonly, which is because the constrained secondary vortices weaken the turbulent mixing and convection heat transfer. Significantly, for the two W-shaped ribs, the limited secondary vortices but fully developed under the hierarchical scheme achieve a higher heat transfer enhancement. Finally, for all considered ribs, the hierarchical scheme can improve the overall performance factor of ( Nu / Nu 0 )/( f / f 0 ) 1/3 by more than 10%, and up to 21.15% for the V-shaped rib. Adjusting design variables, including the decreasing ratio of the rib size and the initial rib size, the hierarchical scheme still provides even higher performance enhancement.

PIV and IRT measurements of hydrothermal performance in a U-shaped heat exchanger with 3D printed detached curved ribs

Experimental and Numerical Investigations of Heat Transfer and Fluid Flow in a Rectangular Channel with Perforated Ribs

Numerical Simulation on Heat Transfer Augmentation by Using Innovative Hybrid Ribs in a Forward-Facing Contracting Channel

Experimental Thermohydraulic Assessment of Novel Curved Ribs for Heat Exchanger Tubes: A Machine Learning Approach

Performance evaluation with turbulent flow and heat transfer characteristics in rectangular cooling channels with various novel hierarchical rib schemes

Investigating Enhanced Convection Heat Transfer in 3D Micro-Ribbed Tubes Using Inverse Problem Techniques

Effect of Ribs on Heat Transfer and Pressure Drop in a U-Bend Channel With Double-Layer, Dome-Shaped Turning Vanes

Numerical study of air-side performance of a finned flat tube heat exchanger with crossed discrete double inclined ribs

Numerical Study of the Influence of Rib Orientation on Heat Transfer Enhancement in Two-Pass Ribbed Rectangular Channel

Experimental and Numerical Investigation of Heat Transfer Inside Two-Pass Rib Roughened Duct (AR = 1:2) under Rotating and Stationary Conditions

Heat Transfer Enhancement and Turbulent Flow in a Rectangular Channel Using Perforated Ribs with Inclined Holes

Experimental and Numerical Investigation of Convection Heat Transfer in a Rectangular Channel with Angled Ribs

Turbulent flow and heat transfer in discrete double inclined ribs tube

Numerical Predictions on Heat Transfer and Flow Characteristics in a Straight Channel with Different Geometric Parameters Wavy Ribs

Numerical Prediction of 45° Angled Ribs Effects on U-shaped Channels Heat Transfer and Flow under Multi Conditions

Experimental and Numerical Investigation of Convection Heat Transfer in Channels with Different Types of Ribs

Experimental Study of Flow and Heat Transfer of High-performance ribs for Internal Cooling of Gas Turbine Blades

The influence of asymmetric truncated ribs on flow and heat transfer of supercritical aviation kerosene in a rectangular curved cooling channel

Effect of cylindrical ribs location in a fan-shaped cavity on thermo-hydraulic performance of a microchannel heatsink

Numerical Analysis of Heat Transfer Characteristics in Ribbed Two-Passed Channel with Varied Cross Section

Thermal Performance of Angled, V-shaped and Leaning-V-shaped Ribs in a Rotating Rectangular Channel with 45° Orientation