Influence of typical technological parameters on the processing quality of laser surface texturing technology for finger sealing
Lingping Chen,Yanchao Zhang,Guoqiang Chen,Jiewei Li,Bowei Zhang,Mingfeng Wang
DOI: https://doi.org/10.1088/2051-672x/ad993e
2024-12-04
Surface Topography Metrology and Properties
Abstract:In recent years, to achieve favorable tribological characteristics, surface texture technology for friction reduction has been extensively studied, and its effectiveness has been successfully validated. The quality of surface texture processing directly impacts the tribological performance of finger seal friction pairs. To investigate the influence of the laser process parameters on the finger seal surface texture of the GH4169 and improve its processability and process predictability, a comparative experiment and analysis involving multiple processing parameters, including the laser power (P), laser frequency (F), scanning speed (V), and scanning times (N), were conducted. To evaluate the quality of laser surface texturing processing technology, four processing morphology parameters were established. Uniform experiments and regression analysis were employed to analyze the influence and synergistic effects of laser processing parameters on processing quality. The research results indicate that laser power, scanning times, and scanning speed are the main process parameters that significantly affect laser surface deformation. The outer diameter is directly proportional to the laser power and inversely proportional to the scanning speed; the bottom diameter ratio is directly proportional to both the laser power and scanning times; and the pit depth initially increases and then decreases with increasing laser power and scanning times. The suitable range of processing parameters is as follows: laser power (10~20%), speed range (400~700 mm/s), scanning times (8~18 times), and laser frequency (20~25 kHz). This research provides theoretical and experimental support for the precise control of surface texture prepared by laser processing of GH4169, laying the foundation for friction and wear tests of textured finger seals.
materials science, multidisciplinary,engineering, mechanical,instruments & instrumentation