Abstract:An innovative structure of segmented-in-series tubular solid oxide fuel cell, the bamboo-like optimized the current collection and achieve higher power density compared with that of the cell with the same axial length. In this study, a comprehensive three-dimensional (3D) numerical model of a bamboo-like micro-tubular solid oxide fuel cell (uT-SOFC) coupling the electrochemical reactions and mass, momentum, heat transfer processes and thermal stress, is developed by using the finite element method for the first time. Investigating the internal conditions under steady-state conditions to understand mass transfer, heat transfer processes, and mechanical states of the bamboo-like uT-SOFCs. The steam flow exhibits limited diffusion in the region of the anode at the internal end of the interconnector, creating a concentration gradient of H 2 O that adversely affects the cell performance. The maximum mole fraction of H 2 O in this region of two-cells and three-cells in series is increased by 185 % and 112 % respectively compared to the overall average of the cells. The interconnector shortens the current transmission path of the cells, and exhibits high current collection efficiency. This structure achieves a lower temperature while attaining higher power density compared to the same axial length cell at 973 K. The temperature of three-cells in series decreased by 3 K–5 K compared with two-cells in series. The thermal stress induced by the interconnector on the cells is minor, and the thermal expansion displacement caused by the interconnector is only approximately 7 μm–8 μm. This study revealed its internal conditions, and provides an insight into the bamboo-like structure.

A 3D printed redox-stable interconnector for bamboo-like tubular solid oxide fuel cells

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Numerical study of a bamboo-like micro-tubular solid oxide fuel cell

Discrete triangular interconnector design for performance enhancement of planar solid oxide fuel cells

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

A cofuel channel microtubular solid oxide fuel/electrolysis cell

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Optimized design of planar solid oxide fuel cell interconnectors

Development of three-layer intermediate temperature solid oxide fuel cells with direct stainless steel based anodes

High and durable performance of an external-manifold designed reversible solid oxide cell stack

3D printing of reversible solid oxide cell stacks for efficient hydrogen production and power generation

Effect of Bi-Layer Interconnector Design on Mass Transfer Performance in Porous Anode of Solid Oxide Fuel Cells

Effect Of Bi-Layer Interconnector Design On The Current Density Of Solid Oxide Fuel Cells

Electrolyte-supported solid oxide fuel cells with ultra-thin honeycomb structure prepared by digital light processing 3D printing technology

Fabrication and Characterization of a Small Tubular Solid Oxide Fuel Cell with the La0.43Ca0.37Ni0.06Ti0.94O3-γ Anode

An Anode-Supported Micro-Tubular Solid Oxide Fuel Cell with Redox Stable Composite Cathode

3D printed Sm-doped ceria composite electrolyte membrane for low temperature solid oxide fuel cells

Electrochemical Property of Multi-Layer Anode Supported Solid Oxide Fuel Cell Fabricated Through Sequential Tape-Casting and Co-Firing

A novel interconnector design of SOFC

Perspectives on the metallic interconnects for solid oxide fuel cells