Abstract:Considerable scattering of experimental wear results affects seriously the evaluation of repeatability and reproducibility of tribological measurements and hampers detecting, studying, and verifying tribological laws. An accurate characterization of the statistics of results, the detection of the influence of operating parameters, and the verification of equations describing tribological phenomena can be achieved only through the analysis of large datasets with wide variation of parameters. Taking advantage of more than 400 experiments performed with the same material pairing (100Cr6) under the same conditions (unlubricated, ball-on-disc configuration, reciprocating sliding) on four different tribometers, the repeatability and reproducibility of volumetric wear measurements has been evaluated. The effect of the tribometer used for the acquisition, of five operating parameters (frequency, number of cycles, stroke, velocity, and normal force), and of the friction coefficient could be characterised using Welch's unequal variances t-test. The proportionality between volumetric wear and the product of sliding distance and normal force (sF N ) is described in Archard's law through the proportionality factor k, commonly known as wear coefficient. By testing Archard's law over seven orders of magnitude of sF N , it was found that this law is not universally valid and that, under certain conditions, the wear coefficient depends on sF N itself. An alternative equation for the dependence of the volumetric wear on sF N is presented. The limits of the validity of Archard's law were investigated by varying the normal force and the sphere radius, using among others experiments with a reused, worn ball.

Experimental study on Tube-to-Tube reciprocating sliding wear behaviors of Inconel 690 heat transfer tubes

Experimental study on erosion wear behavior of PFA coated stainless steel tube

The effect of NaCl concentration on impact-sliding fretting corrosion behavior of Inconel 690TT heat transfer tubes

Tube-to-tube impact wear damage mechanism and nonlinear ultrasonic detection method of alloy 690 tubes

Experimental Investigations into Fretting Wear and Damage Mechanisms of Inconel X-750 Alloy

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact

Experimental investigation on ultrasonic surface rolling of Inconel 690TT

Effects of ultrasonic surface rolling processing and plasma nitriding on the fretting wear behavior of Inconel 690TT

The role of normal force on the fretting corrosion behaviour of alloy 690 TT tube against 410 stainless steel plate in high temperature high pressure water

Fretting Wear Behavior and Damage Mechanisms of Inconel X-750 Alloy in Dry Contact Condition

Experimental and Numerical Study of Wrought Inconel 718 Under Thermal Cycles of Variable Amplitude Coupled with Mechanical Loading

Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields

Frictional Study on 30CrNi2MoVA Steel Based on Experiments and Finite Element Simulation: Wear Prediction

Effect of CrAlTiN Coating on Fretting Wear Behavior of Inconel 690 Alloy in Dry and Seawater Conditions

Numerical Simulation Of Fretting Wear Of Heat-Transfer Tubes In Steam Generator Under Random Excitation Forces

Wear mechanism, subsurface structure and nanomechanical properties of additive manufactured Inconel nickel (IN718) alloy

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Fretting Wear Behavior and Damage Mechanisms of Inconel X-750 Alloy in Dry Contacts

The effectiveness of protective layer in reducing fretting wear of Alloy 690TT tubes/ 405 stainless steel plates

Experimental and numerical investigation of Inconel 718 machining with worn tools

Large scale multi-parameter analysis of wear of self-mated 100Cr6 steel – A study of the validity of Archard's law