Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sequential Effect of Dual‐Layered Hybrid Graphite Anodes on Electrode Utilization During Fast‐Charging Li‐Ion Batteries

Sequential Effect of Dual‐Layered Hybrid Graphite Anodes on Electrode Utilization During Fast‐Charging Li‐Ion Batteries (Adv. Sci. 31/2024)

Multi‐Interface Strategy for Electrode Tailoring Toward Fast‐Charging Lithium‐Ion Batteries

Ultrafast Charge and Long Life of High-Voltage Cathodes for Dual-Ion Batteries Via a Bifunctional Interphase Nanolayer on Graphite Particles.

Reversible Li Plating on Graphite Anodes through Electrolyte Engineering for Fast-Charging Batteries.

Integrated Dual‐Phase Ion Transport Design Within Electrode for Fast‐Charging Lithium‐Ion Batteries

Electrochemistry-Driven Interphase Doubly Protects Graphite Cathodes for Ultralong Life and Fast Charge of Dual-Ion Batteries.

Suppressing Lithium Metal Plating of Graphite Anode with Al2O3 and TiO2 for Fast-Charging Li-Ion Batteries

Tuning Rate‐Limiting Factors for Graphite Anodes in Fast‐Charging Li‐Ion Batteries

Synergy effect of regulated Li-plating and functional solid electrolyte interphase on graphite anodes

Interface optimization mechanism and quantitative analysis of hybrid graphite anode for fast-charging lithium-ion batteries

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

3D Pathways Enabling Highly‐Efficient Lithium Reservoir for Fast‐Charging Batteries

Multi-layering of carbon conductivity enhancers for boosting rapid recharging performance of high mass loading lithium ion battery electrodes

Dual-Phase Lithium Metal Anode Containing a Polysulfide-Induced Solid Electrolyte Interphase and Nanostructured Graphene Framework for Lithium-Sulfur Batteries.

Identifying Cathode and Anode Polarizations During Practical High‐rate Charging/discharging in Different Li‐ion Pouch Batteries

Scalable Layer-by-Layer Stacking of the Silicon-Graphite Composite: Prelithiation Strategy of the High-Capacity Anode for Energy/Power-Dense Li Batteries

Promoting the reversibility of lithium ion/lithium metal hybrid graphite anode by regulating solid electrolyte interface

A Hybrid Electrolytes Design for Capacity‐Equivalent Dual‐Graphite Battery with Superior Long‐Term Cycle Life

Covalent Carbide Interconnects Enable Robust Interfaces and Thin SEI for Graphite Anode Stability under Extreme Fast Charging