Abstract:Li-ion batteries are the backbone of all electric vehicles (EVs) in production today [1]. However, they compete poorly against the few-minute refueling time of fossil fuel powered vehicles [2, 3]. To successfully replace fossil fuel powered vehicles, the EV batteries must support charging rates under the 15-minute mark as determined by the eXtreme Fast Charging (XFC) standard defined by the U.S. Department of Energy [4]. When subjected to XFC charging rates, well-known problems of lithium plating and delamination plague graphite anodes due to local potential gradients and binder degradation respectively [5]. Our work replaces the traditional polymer binder with conductive titanium carbide interconnects that covalently join graphite particles as well as bond them to the current collector [6]. This new architecture demonstrates ~400% increase in electrical conductivity compared to traditional architectures with polymer binders while maintaining interparticle integrity and improving adhesion. The adhesion and mechanical properties are provided by conductive chemical bonds mitigating delamination as these novel bonds suffer less mechanical and chemical degradation under high current rates than adhesion provided by polymer binders. The improved conductivity was also utilized to form a solid electrolyte interphase (SEI) at rates up to 4C reducing the ionic impedance of the SEI interface significantly [7]. The improved graphite electrodes can sustain 15-minute charge maintaining 80% of the specific capacity of the graphite particles for 800 cycles at commercially relevant loadings. Our studies introduce an effective strategy to engineer Li-ion battery electrode architectures that simultaneously improve electrical and ionic conductivity mitigating lithium plating and delamination under XFC charging rate needed for the mass adoption of EVs. Habib, A.A., S. Motakabber, and M.I. Ibrahimy. A comparative study of electrochemical battery for electric vehicles applications. in 2019 IEEE International Conference on Power, Electrical, and Electronics and Industrial Applications (PEEIACON). 2019. IEEE. Balali, Y. and S. Stegen, Review of energy storage systems for vehicles based on technology, environmental impacts, and costs. Renewable and Sustainable Energy Reviews, 2021. 135: p. 110185. Andwari, A.M., et al., A review of Battery Electric Vehicle technology and readiness levels. Renewable and Sustainable Energy Reviews, 2017. 78: p. 414-430. Dufek, E.J., et al., Developing extreme fast charge battery protocols–A review spanning materials to systems. Journal of Power Sources, 2022: p. 231129. Ahmed, S., et al., Enabling fast charging–A battery technology gap assessment. Journal of Power Sources, 2017. 367: p. 250-262. Rangom, Y., Covalently Joined Carbonaceous and Mettalloid Powders by Carbide-Based Interconnects and Method of Fabrication for High-Performance Electrodes. 2021: United States preliminary patent #63/248,293. Rangom, Y., T.T. Duignan, and X. Zhao, Lithium-ion transport behavior in thin-film graphite electrodes with SEI layers formed at different current densities. ACS Applied Materials & Interfaces, 2021. 13(36): p. 42662-42669. Figure 1

Sequential Effect of Dual‐Layered Hybrid Graphite Anodes on Electrode Utilization During Fast‐Charging Li‐Ion Batteries (Adv. Sci. 31/2024)

Sequential Effect of Dual‐Layered Hybrid Graphite Anodes on Electrode Utilization During Fast‐Charging Li‐Ion Batteries

Electrochemistry-Driven Interphase Doubly Protects Graphite Cathodes for Ultralong Life and Fast Charge of Dual-Ion Batteries.

Ultrafast Charge and Long Life of High-Voltage Cathodes for Dual-Ion Batteries Via a Bifunctional Interphase Nanolayer on Graphite Particles.

Multi‐Interface Strategy for Electrode Tailoring Toward Fast‐Charging Lithium‐Ion Batteries

Integrated Dual‐Phase Ion Transport Design Within Electrode for Fast‐Charging Lithium‐Ion Batteries

Reversible Li Plating on Graphite Anodes through Electrolyte Engineering for Fast-Charging Batteries.

Soft Carbon Filled in Expanded Graphite Layer Pores for Superior Fast-Charging Lithium-Ion Batteries

Interface optimization mechanism and quantitative analysis of hybrid graphite anode for fast-charging lithium-ion batteries

Tuning Rate‐Limiting Factors for Graphite Anodes in Fast‐Charging Li‐Ion Batteries

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Ultrafast Dual-Shock Chemistry Synthesis of Ordered/Disordered Hybrid Carbon Anodes: High-Rate Performance of Li-Ion Batteries

Multi-layering of carbon conductivity enhancers for boosting rapid recharging performance of high mass loading lithium ion battery electrodes

Electrolyte Optimization for Graphite Anodes Toward Fast Charging

3D Pathways Enabling Highly‐Efficient Lithium Reservoir for Fast‐Charging Batteries

Covalently Joined Electrode Architectures for Extreme Fast Charging Li-Ion Batteries

Controlled interfacial reactions with Co 2 P nanoparticles onto natural graphite anode for fast-charging lithium-ion batteries

Introducing a Pseudocapacitive Lithium Storage Mechanism into Graphite by Defect Engineering for Fast-Charging Lithium-Ion Batteries

Synergy effect of regulated Li-plating and functional solid electrolyte interphase on graphite anodes

The Influence of Calendering on the Fast Charging Performance and Lithium Plating of Hard Carbon Blend Anodes

50C Fast‐Charge Li‐Ion Batteries Using a Graphite Anode