Aref Samadi-Dooki,Mark A. Lamontia,Juan David Londoño,Curtis Williamson,Heidi E. Burch,Mobin Yahyazadehfar,Leopoldo A. Carbajal,Kostantinos Kourtakis
Abstract:Polymer films have broad applications in different industries with specific requirements for their optical and mechanical properties. In mass production, processing conditions during film formation that apply forces and motions in various directions to the film tend to manifest preferred molecular chain orientation in the film microstructure, which unavoidably produces optical and mechanical anisotropies. In this paper, we investigate the effect of such macromolecular orientations on the optical and mechanical anisotropies of several polymer films, including polystyrene, poly(methyl methacrylate), poly(ethylene terephthalate), poly(ethylene naphthalate), poly(ether ether ketone), poly(ether sulfones), poly(ethylene chlorotrifluoroethylene), poly(phenylsulfone), and polycarbonate, at temperatures well below their respective glass transitions (Tg). The film mechanical responses, including elasticity, yielding, and post-yield behaviors, were obtained for the in- and out-of-plane directions utilizing tensile and nanoindentation testing methods, respectively. In addition, the net chain orientation within the films was evaluated by birefringence through analyzing the film optical refractive indices, which were verified and complemented by wide-angle X-ray scattering (WAXS) measurements. The results reveal a considerable quantitative correlation between the birefringence and the degree of elastic anisotropy and a qualitative correlation between the chain orientation and the film post-yield tensile instability (necking). These observations corroborate the interrelationship between the microstructure of polymer films and their optical and mechanical properties. In addition, they emphasize that process conditions can be selected to tune the optical and mechanical anisotropies to best serve the material performance in specific devices. We also propose an empirical equation to approximate the out-of-plane film stiffness based upon the optical and in-plane mechanical properties.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to study the influence of polymer chain orientation on the optical and mechanical anisotropy of polymer films. Specifically, the paper focuses on how the polymer chain orientation formed under different processing conditions, such as temperature, heating and cooling rates, draw ratios, etc., affects the optical and mechanical properties of polymer films. Through this research, the author hopes to reveal the relationship between polymer chain orientation and the optical and mechanical anisotropy of the film, and propose an empirical formula to approximately calculate the out - of - plane stiffness of the film based on its optical and in - plane mechanical properties.
The paper mentions that polymer films have a wide range of applications in different industries, such as food and medical packaging, electronic devices and electric motors. These films need to meet specific mechanical strength requirements and optical performance requirements in practical applications. However, due to different processing conditions, polymer films may exhibit strong directional mechanical responses, for example, one planar direction may be stiffer than the other, or the mechanical responses of the film in - plane and out - of - plane are different. Therefore, understanding the influence of polymer chain orientation on the optical and mechanical properties of polymer films is crucial for optimizing the design and performance of film materials.
In addition, the paper also emphasizes that by selecting appropriate processing conditions, the optical and mechanical anisotropy of polymer films can be adjusted to better serve the needs of specific devices. This not only helps to improve the performance of film materials, but also can guide the process optimization in industrial production.