Abstract:beta phase isotactic polypropylene (beta-iPP) with the beta phase lamellae oriented parallel to the melt extrusion direction, was employed to investigate the deformation-induced structure evolution at various temperatures (25, 80, 110, 130 and 140 degrees C). The orientation change of beta phase during deformation greatly influences the beta to alpha phase transformation and its temperature dependence. At temperatures lower than 110 degrees C, the orientation of beta phase is almost unchanged during deformation, and void or crack forms before fragmentation and reorientation of beta phase. The crystal size change of beta phase is small, and the defolding of the beta lamellae triggers the beta to alpha phase transformation. As the deformation temperature rises to 130 and 140 degrees C, the reorientation of beta phase occurs gradually upon stretching, and the size of micro-voids decreases due to the fact that less beta crystal fragmentation takes place at high draw temperature than that at low temperature. The beta to alpha phase transformation is mainly induced by intra-lamella slip, and the trend of crystal size change of beta phase is larger. The chains orientation changes from perpendicular to the stretching direction in beta phase to parallel to the stretching direction in alpha phase is achieved by the chains defolding of beta phase along the stretching direction at temperatures lower than 110 degrees C, and it is through the chains reorientation of beta phase along the stretching direction at temperatures of 130 and 140 degrees C. The crystal size of alpha phase of the deformed beta-iPP during deformation depends on the dynamic balance of the breakage of existing alpha crystal and the formation of new crystal through phase transformation. Specially, at draw temperature of 25 degrees C, the slippage of beta phase relieves the breakage of alpha phase crystal, which indicates that the high content of beta phase crystal really accounts for the toughening effect on iPP. (C) 2012 Elsevier Ltd. All rights reserved.

Stretch-induced structural evolution of pre-oriented isotactic polypropylene films: An in-situ synchrotron radiation SAXS/WAXS study

Stretch-induced structural evolution of pre-oriented isotactic polypropylene films: An <i>in-situ</i> synchrotron radiation SAXS/WAXS study

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Structural evolution of biaxially oriented polypropylene films upon asynchronous stretching

Enhanced Melt-Recrystallization Process of Propylene-Ethylene Copolymer During the Uniaxial Stretching with the Aid of Isotactic Polypropylene

Oriented Structure in Stretched Isotactic Polypropylene Melt and Its Unexpected Recrystallization: Optical and X-Ray Studies

The Study of Room-Temperature Stretching of Annealed Polypropylene Cast Film with Row-Nucleated Crystalline Structure

Deformation Mechanism of Ipp under Uniaxial Stretching over a Wide Temperature Range: an In-Situ Synchrotron Radiation SAXS/WAXS Study

Application of an Interpenetrating Network Model to the Necking in the Microcrystalline Region in Four Annealed Isotactic Polypropylene Films Subjected to Uniaxial Stretching at Room Temperature

Stress-induced Microphase Separation of Interlamellar Amorphous Phase in Hard-Elastic Isotactic Polypropylene Film

Study on Structure and Property Relations of Α‐ipp During Uniaxial Deformation Via in Situ Synchrotron SAXS/WAXS and POM Investigations

Stretch-induced structural transition of linear low-density polyethylene during uniaxial stretching under different strain rates

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. 2. Molecular Orientation During Necking Process of Isotactic Polypropylene

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. Part Iii: Influence of Morphology on Molecular Orientation of Isotactic Polypropylene Films Subjected to Uniaxial Stretching

Real Time Synchrotron SAXS and WAXS Investigations on Temperature Related Deformation and Transitions of Β-Ipp with Uniaxial Stretching

Understanding in the morphology and tensile behavior of isotactic polypropylene cast films with different stereo-defect distribution

Deformation-induced Structure Evolution of Oriented Β-Polypropylene During Uniaxial Stretching

Competition of shearing and cavitation effects on the deformation behavior of isotactic polypropylene during stretching

Effects Of Solid-State Stretching On Microstructure Evolution And Physical Properties Of Isotactic Polypropylene Sheets

Inhomogeneous Deformation of Microcrystalline Region in Isotactic Polypropylene Film Revealed by A Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress