Abstract:In recent years, additive manufacturing of Aluminium alloys has achieved remarkable developments, allowing for the replacement of casted components in industrial fields such as aerospace and automotive. However, the main issue affecting these alloys during operation at high temperatures and in critical environments is poor corrosion and wear resistance. The present work aims to produce a coated layer using an innovative surface treatment, Plasma Electrolytic Oxidation (PEO), on two high-strength Al alloys, AlSi10Mg and A205, processed by Laser-Powder Bed Fusion (L-PBF), in order to increase the corrosion and wear performance of the material. For each material, PEO coating was produced on two different surface conditions (as-fabricated and polished) and characterised in terms of morphology and composition through scanning electron microscopy (SEM) and digital microscope analysis. A PEO coating thickness of over 40 μm was achieved for both alloys, while the porosity was found around 13 % and 3 % for AlSi10Mg and A205, respectively. Additionally, nano-hardness analyses were carried out to understand the differences compared to the virgin material, highlighting an increase in hardness of the PEO coating at least 10 greater than the substrate for both materials. Finally, friction and corrosion tests were performed. The results in terms of wear rate and corrosion rate were compared with those obtained on uncoated manufactured samples. In particular, an increase in the wear and corrosion performance of 26.4 % and 37.5 %, respectively for the AlSi10Mg, and 88.4 % and 53.1 % for the A205, were evaluated. It was demonstrated that the presence of the oxidised layer improved the mechanical properties of the surface and, accordingly, the general performance of the material. Furthermore, performing a surface polishing treatment before PEO treatment helped to further increase the tribological and corrosion properties.

Plasma electrolytic polishing-induced surface chemical and structural evolutions of additively manufactured Ti-6Al-4 V coupons

Effects of Plasma Electrolytic Polishing on the Surface and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Specimen Fabricated by Laser Powder Bed Fusion

Metal Surface Nanopatterning for Enhanced Interfacial Adhesion in Fiber Metal Laminates

Optimization and mechanism of precise finishing of TC4 alloy by plasma electrolytic polishing

Surface Finishing of 3D-Printed Ti-6Al-4 V Alloy by Electrolyte Plasma Polishing: Process Optimization and Microstructure

Electropolishing of Additively Manufactured Ti-6Al-4V Surfaces in Nontoxic Electrolyte Solution

Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing

Optimisation of the laser polishing for laser-powder bed fusion and electron beam-powder bed fusion Ti6Al4V surfaces

Study on Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting

Manipulation Tribological Behavior of Ti6Al4V Alloy Via a Duplex Treatment of Double Glow Plasma Surface Molybdenizing-Laser Surface Texturing (LST)

Two-step laser based surface treatments of laser metal deposition manufactured Ti6Al4V components

Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing

Advancements in surface finish for additive manufacturing of metal parts: a comprehensive review of plasma electrolytic polishing (PEP)

Plasma electrolytic oxidation of Ti-6Al-4V alloy and its influence on the machinability during micro-milling

Improving Surface Electrochemical Polishing Quality of Additive Manufactured AlSi10Mg by Reconstituting the Si Phase

Effect of Electrolytic Plasma Polishing on Surface Properties of Titanium Alloy

Post-Processing of AM-EBM Ti6Al4V for Biomedical Applications: Evolution of Mechanical Properties as a Function of Surface Roughness

A Novel Electropulsing Treatment to Improve the Surface Strength and Repair the Pore of Additively Manufactured Ti-6Al-4V Alloy

Plasma electrolytic oxidation (PEO) as surface treatment for high strength Al alloys produced by L-PBF: Microstructure, performance, and effect of substrate surface roughness

Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components

On the Optimization of Roughness and Corrosion Resistance of Laser Beam Powder Bed Fusion Fabricated Ti–6Al–4V Parts—An Electrochemical Approach