Abstract:Ti6Al4V (TC4) alloy has been widely applied in the military, industrial, chemical, and medical fields due to their excellent thermal stability, corrosion resistance , and biocompatibility. However, titanium alloys are notorious for their poor tribological properties, such as their high friction coefficients and low surface bearing capacities. To tackle this problem, combination of laser surface texturing (LST) and double glow plasma chromizing was conducted to improve the wear resistance of TC4. LST was first conducted to produce uniform dimples with a diameter of 300 μm and gradient density of 11 % on the Ti6Al4V substrate. A chromizing coating (Cr-coating) was subsequently deposited on the surfaces of the textured and raw Ti6Al4V alloy by double glow plasma surface alloying (DGPSA). A continuous and compact Cr-coating with a thickness of about 55 μm was formed on TC4 after being maintained at a temperature of 850 °C, and the coating was mainly composed of a solid solution and intermetallic compounds of Cr 2 Ti phases. The surface hardness after alloying was two times higher than that of the TC4 substrate. Comparative assessments on the wear resistance of the Cr-coatings with and without LST treatment and the TC4 alloy were carried out using a ball-on-disk wear tester. The results showed that the mass loss and specific wear rate of the duplex-treated sample were 1.54 mg and 7.14 × 10 −4 mm 3 ·N −1 ·m −1 . The mass loss and specific wear rate of the TC4 were 4.32 mg and 1.62 × 10 −3 mm 3 ·N −1 ·m −1 . The specific wear rates of the four tested samples were in the following order: the duplex-treated TC4 < textured TC4 < chromized TC4 < polished TC4. The coating obtained by LST-double glow plasma chromizing duplex treatment exhibited an outstanding durability and the best mechanical performance. Thus, this approach be used for the protection of Ti6Al4V surface in engineering components and medical instruments.

Surface polishing and modification of Ti-6Al-4V alloy by shear thickening polishing

Manipulation Tribological Behavior of Ti6Al4V Alloy Via a Duplex Treatment of Double Glow Plasma Surface Molybdenizing-Laser Surface Texturing (LST)

A nano-scale mirror-like surface of Ti–6Al–4V attained by chemical mechanical polishing

An overview of surface modification, A way toward fabrication of nascent biomedical Ti–6Al–4V alloys

Surface Finishing of 3D-Printed Ti-6Al-4 V Alloy by Electrolyte Plasma Polishing: Process Optimization and Microstructure

Study on Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting

Surface Texture-Based Surface Treatments on Ti6Al4V Titanium Alloys for Tribological and Biological Applications: A Mini Review

Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing

Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy

Plasma electrolytic polishing-induced surface chemical and structural evolutions of additively manufactured Ti-6Al-4 V coupons

Post-Processing of AM-EBM Ti6Al4V for Biomedical Applications: Evolution of Mechanical Properties as a Function of Surface Roughness

Enhanced Biotribological and Anticorrosion Properties and Bioactivity of Ti6Al4V Alloys with Laser Texturing

Effects of Plasma Electrolytic Polishing on the Surface and Mechanical Properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si Specimen Fabricated by Laser Powder Bed Fusion

Enhancing the surface finish and corrosion resistance of laser powder bed fusion NiTi surfaces through chemical polishing

Surface and Property Characterization of Laser Polished Ti6Al4V

Material Removal and Surface Integrity Analysis of Ti6Al4V Alloy after Polishing by Flexible Tools with Different Rigidity

Novel Mussel-Inspired Ti-6Al-4V Surfaces with Biocompatibility, Blood Ultra-Drag Reduction and Superior Durability

Electrochemical Polishing Method for Titanium Alloys with a Microgroove Structure

Surface modification of Ti-6Al-4V alloy via friction-stir processing: Microstructure evolution and dry sliding wear performance

Electrochemical and in Vitro Behavior of the Nanosized Composites of Ti-6Al-4V and TiO2 Fabricated by Friction Stir Process

Experimental and Finite Element Simulation Studies of the Bio-Tribological Behavior of L-PBF Ti-6Al-4V Alloys with Various Surface Roughness