Abstract:Alloys with large solidification intervals are prone to issues from the disordered growth and defect formation; accordingly, finding ways to effectively optimize the microstructure, further to improve the mechanical properties is of great importance. To this end, we couple travelling magnetic fields with sequential solidification to continuously regulate the mushy zones of Al-Cu-based alloys with large solidification intervals. Moreover, we combine experiments with simulations to comprehensively analyze the mechanisms on the optimization of microstructure and properties. Our results indicate that only downward travelling magnetic fields coupled with sequential solidification can obtain the refined and uniform microstructure, and promote the growth of matrix phase α-Al along the direction of temperature gradient. Additionally, the secondary dendrites and precipitates are reduced, while the solute partition coefficient and solute solid-solubility are raised. Ultimately, downward travelling magnetic fields can increase the ultimate tensile strength, yield strength, elongation and hardness from 196.2 MPa, 101.2 MPa, 14.5 % and 85.1 kg mm−2 without travelling magnetic fields to 224.1 MPa, 114.5 MPa, 17.1 % and 102.1 kg mm−2, and improve the ductility of alloys. However, upward travelling magnetic fields have the adverse effects on microstructural evolution, and lead to a reduction in the performance and ductility. Our findings demonstrate that long-range directional circular flows generated by travelling magnetic fields directionally alter the transformation and redistribution of solutes and temperature, which finally influences the solidification behavior and performance. Overall, our research present not only an innovative method to optimize the microstructures and mechanical properties for alloys with large solidification intervals, but also a detailed mechanism of travelling magnetic fields on this optimization during the sequential solidification.

Relationship between cross-sectional plane and corresponding morphology in an immiscible alloy powder with core-deviated structure

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

The Core-Shell Structure of Al70bi11sn19 Immiscible Alloy Particles

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Metastable Structures of Immiscible System Induced by Mechanical Alloying

Core-shell structure and stability of nanocrystalline precipitates in Fe83.3Si4B8P4Cu0.7 soft magnetic amorphous alloy

Observations and simulations for phase separation process of immiscible Fe50Sn50 alloy droplets placed on a chilling surface

In situ study the effect of refiner on the microstructure evolution of variable cross-section structure by synchrotron X-ray radiography

Microstructure evolution of the rapidly solidified alloy powders and composite powders

Size-dependent Microstructure Evolution and Formation Mechanisms During the Gas Atomization Process of FGH4113A Ni-based Superalloy Powder

On the banded microstructures in CoCrMo-Ni in-situ alloyed through laser powder bed fusion

Microstructure evolution, Cu segregation and tensile properties of CoCrFeNiCu high entropy alloy during directional solidification

Determining Alloy Nucleation Core Origin and Grain Refinement Strategy Based on the Dependence Degree of Content Difference

Microstructure of Rapidly Solidified Cu83Fe17 Alloys

Mechanical Alloying of Immiscible Metallic Systems: Process, Microstructure, and Mechanism

Mechanically Driven Alloying and Structural Evolution of Nanocrystalline Fe 60 Cu 40 Powder

Using the Phase Field Method to Investigate Microstructural Evolution of Semi-Solid 357.0 Slurries

Formation of Stray Grains During Directional Solidification of a Superalloy AM3

Non-Equilibrium Solidification Behavior With Solute Trapping Associated With Powder Characteristics During Electron Beam Additive Manufacturing

Optimizing the Microstructures and Mechanical Properties of Al-Cu-based Alloys with Large Solidification Intervals by Coupling Travelling Magnetic Fields with Sequential Solidification