Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

LDH derived Co-Al nanosheet for lipid hydrotreatment to produce green diesel

Ni-Fe-Al LDH derived NiFe nanosheet for green diesel production from lipid hydrotreatment

MOF-derived Co nanoparticle on nitrogen-rich carbon for fatty acid hydrotreatment into green diesel

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

Highly Efficient Conversion of Oleic Acid to Heptadecane Without External Hydrogen Source over Atomic Layer Deposited Bimetallic NiPt Catalysts

Synthesis of Acid-Base Bifunctional Catalysts by in Situ Growth of Co-LDH Nanosheets on HY Zeolite to Enhance Co(OH)X Utilization for Microalgal Lipid Conversion

Fe-promoted Ni catalyst with extremely high loading and oxygen vacancy for lipid deoxygenation into green diesel

Green diesel-like hydrocarbon production by H2-free catalytic deoxygenation of oleic acid via Ni/MgO-Al2O3 catalysts: Effect of the metal loading amount

Frustrated Lewis pair catalyst realizes efficient green diesel production

Nickel-Alumina Catalysts for the Transformation of Vegetable Oils into Green Diesel: The Role of Preparation Method, Activation Temperature, and Reaction Conditions

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Effective Conversion of Heteroatomic Model Compounds in Microalgae-Based Bio-Oils to Hydrocarbons over Β-Mo2c/cnts Catalyst

Co Hydrogenation to Ethanol and Higher Alcohols Over Ultrathin Cucoal Nanosheets Derived from Ldh Precursor

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Catalytic hydrotreatment of triglycerides and various renewable oils into green diesel over metal–organic frameworks derived Ni@C catalyst

High hydrothermal stability Co@NC catalyst for hydrothermal deoxygenation of algae-based bio-oil model compound

Temperature–Controlled hydrothermal hydrogenation of palmitic acid to alkanol or alkanes over Co@CN–x catalysts derived from ZIF–67

Acid-base bifunctional catalyst with coordinatively unsaturated cobalt-nitrogen sites for the simultaneous conversion of microalgal triglycerides and free fatty acids into biodiesel

Synthesis of Renewable Diesel Range Alkanes by Hydrodeoxygenation of Palmitic Acid over 5% Ni/Cnts under Mild Conditions