Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

Effective Conversion of Heteroatomic Model Compounds in Microalgae-Based Bio-Oils to Hydrocarbons over Β-Mo2c/cnts Catalyst

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Catalytic Transfer Hydrogenation Of Oleic Acid To Octadecanol Over Magnetic Recoverable Cobalt Catalysts

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Effective Hydrodeoxygenation of Palmitic Acid to Diesel-Like Hydrocarbons over MoO 2 /cnts Catalyst

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Conversion of Palmitic Acid to Jet Fuel Components over Mo/H-ZSM-22 Bi-Functional Catalysts with High Carbon Reservation

MOF-Derived Co3O4 Nanoparticles Catalyzing Hydrothermal Deoxygenation of Fatty Acids for Alkane Production

Catalytic Upgrading of Pretreated Algal Oil with a Two-Component Catalyst Mixture in Supercritical Water

Highly stable Mo-based catalysts for selective hydrodeoxygenation to produce diesel-like hydrocarbons

Catalytic Transfer Hydrogenation with Methanol over Pt/C Catalyst for Synergistic Hydrothermal Hydrogenation of Palmitic Acid

Hydrothermal Catalytic Upgrading of Model Compounds of Algae-Based Bio-Oil to Monocyclic Aromatic Hydrocarbons over Hierarchical HZSM-5

Molybdenum Carbide‐Catalyzed Conversion of Renewable Oils into Diesel‐like Hydrocarbons

Enhancement of Microalgae Bio-Oil Quality Via Hydrothermal Liquefaction Using Functionalized Carbon Nanotubes

High hydrothermal stability Co@NC catalyst for hydrothermal deoxygenation of algae-based bio-oil model compound

Synthesis of Renewable Diesel Range Alkanes by Hydrodeoxygenation of Palmitic Acid over 5% Ni/Cnts under Mild Conditions

Towards Conversion of Octanoic Acid to Liquid Hydrocarbon Via Hydrodeoxygenation over Mo Promoter Nickel-Based Catalyst

Mo, Cu Bimetallic Loaded Hierarchical Pore ZSM-5 Catalysts for the Hydrothermal Aromatization of Algal Bio-Oil Model Compounds

Hydrothermal Catalytic Processing of Pretreated Algal Oil: A Catalyst Screening Study