Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Catalytic Decarbonylation Of Stearic Acid To Hydrocarbons Over Activated Carbon-Supported Nickel

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

Highly Efficient N-Doped Carbon-Supported Subnanometer Cobalt–Zinc Bimetallic Catalysts for Decarbonylation of Fatty Acids into Long-Chain Olefins

Hydrodecarboxylation of fatty acids into liquid hydrocarbons over a commercial Ru/C catalyst under mild conditions

Efficient and Stable Cu-Ni/ZrO2 Catalysts for in Situ Hydrogenation and Deoxygenation of Oleic Acid into Heptadecane Using Methanol As a Hydrogen Donor

Selective Decarbonylation of Fatty Acids over the PtCo3Nx@NC Catalyst to Produce Long-Chain Olefins

Catalytic Transfer Hydrogenation Of Oleic Acid To Octadecanol Over Magnetic Recoverable Cobalt Catalysts

Effective Conversion of Heteroatomic Model Compounds in Microalgae-Based Bio-Oils to Hydrocarbons over Β-Mo2c/cnts Catalyst

Graphitic carbon embedded FeNi nanoparticles for efficient deoxygenation of stearic acid without using hydrogen and solvent

Effective Hydrodeoxygenation of Stearic Acid and Cyperus Esculentus Oil into Liquid Alkanes over Nitrogen-Modified Carbon Nanotube-Supported Ruthenium Catalysts

Preparation of Reduced Ni-Nb-O Composite Hydrogenation Catalysts for Highly Selective Conversion of Free Fatty Acids to N-Alkanes

Facile synthesis Cobalt catalysts for regulating the deoxygenation pathways in producing diesel-like hydrocarbon fuels

Enhancement of hydrogen-rich gas production by acetic acid steam reforming: characterization of Ni–Co modified biochar-based catalysts

Nanostructured Molybdenum Carbides Supported on Carbon Nanotubes As Efficient Catalysts for One-Step Hydrodeoxygenation and Isomerization of Vegetable Oils

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Efficient and Stable Ni-Cu Catalysts for Ex Situ Catalytic Pyrolysis Vapor Upgrading of Oleic Acid into Hydrocarbon: Effect of Catalyst Support, Process Parameters and Ni-to-Cu Mixed Ratio

Synthesis of Renewable Diesel Range Alkanes by Hydrodeoxygenation of Palmitic Acid over 5% Ni/Cnts under Mild Conditions

MOF-derived Co nanoparticle on nitrogen-rich carbon for fatty acid hydrotreatment into green diesel

Amorphous N x C Coating Promotes Electrochemical CO 2 Deep Reduction to Hydrocarbons over Ag Nanocatalysts