Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

MOF-derived Co nanoparticle on nitrogen-rich carbon for fatty acid hydrotreatment into green diesel

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

LDH derived Co-Al nanosheet for lipid hydrotreatment to produce green diesel

Highly Efficient N-Doped Carbon-Supported Subnanometer Cobalt–Zinc Bimetallic Catalysts for Decarbonylation of Fatty Acids into Long-Chain Olefins

Ni-Fe-Al LDH derived NiFe nanosheet for green diesel production from lipid hydrotreatment

CuO@NiO Nanoparticles Derived from Metal–Organic Framework Precursors for the Deoxygenation of Fatty Acids

Fe-promoted Ni catalyst with extremely high loading and oxygen vacancy for lipid deoxygenation into green diesel

Green Diesel Production Catalyzed by MoNi Catalysts Supported on Rice Husk Biochar

Green diesel-like hydrocarbon production by H2-free catalytic deoxygenation of oleic acid via Ni/MgO-Al2O3 catalysts: Effect of the metal loading amount

In-situ Preparation of MnFeCoNiCu/C for the Sustainable Co-Production of Bio-Jet Fuel and Green Diesel under Solvent-Free and Low Hydrogen Pressure Conditions

Co3Mo3N as an alternative for noble-metal catalysts in hydrodeoxygenation of methyl palmitate to diesel range hydrocarbons

MOF-Derived Co3O4 Nanoparticles Catalyzing Hydrothermal Deoxygenation of Fatty Acids for Alkane Production

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Catalytic hydrotreatment of triglycerides and various renewable oils into green diesel over metal–organic frameworks derived Ni@C catalyst

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo2C/MCM-41 catalysts with tuned surface properties

Efficient catalytic conversion of jatropha oil to high grade biofuel on Ni-Mo<sub>2</sub>C/MCM-41 catalysts with tuned surface properties

Improved Conversion of Stearic Acid to Diesel-Like Hydrocarbons by Carbon Nanotubes-Supported CuCo Catalysts

Co-based metal-organic frameworks confined N-hydroxyphthalimide for enhancing aerobic desulfurization of diesel fuels

Frustrated Lewis pair catalyst realizes efficient green diesel production

Facile synthesis Cobalt catalysts for regulating the deoxygenation pathways in producing diesel-like hydrocarbon fuels