Abstract:In the design of high-speed low-power electrical generators for unmanned aircraft and spacecraft, maximization of specific output (power/weight) is of prime importance. Several magnetic circuit configurations (radial-field, axial-field, flux-squeezing, homopolar) have been proposed, and in this paper the relative merits of these configurations are subjected to a quantitative investigation over the speed range 10 000-100 000 rev/min and power range 250 W-10 kW. The advantages of incorporating new high energy-density magnetic materials are described. Part 1 deals with establishing an equivalent circuit for permanent-magnet generators. For each configuration the equivalent circuit parameters are related to the physical dimensions of the generator components and an optimization procedure produces a minimum volume design at discrete output powers and operating speeds. The technique is illustrated by a quantitative comparison of the specific outputs of conventional radial-field generators with samarium cobalt and alnico magnets. In Part II the specific outputs of conventional, flux-squeezing, and claw-rotor magnetic circuit configurations are compared. The flux-squeezing configuration is shown to produce the highest specifilc output for small sizes whereas the conventional configuration is best at large sizes. For all sizes the claw-rotor configuration is significantly inferior. In Part I1l the power densities available from axial-field and flux-switching magnetic circuit configurations are maximized, over the power range 0.25-10 kW and speed range 10 000-100 000 rpm, and compared to the results of Parts I & II. For the axial-field configuration the power density is always less than that of the conventional and flux-squeezing radial-field configurations.

Lightweight Design of Magnetic Integrated Transformer for High Voltage Power Supply in Electro-aerodynamic Propulsion System

Design and Modeling of Hybrid Magnetic Levitation Rotor Weight Support Systems for Hydraulic Turbine Generator Units

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

High-Frequency High-Density Bidirectional EV Charger

Design and Optimization of a Wireless Power Transfer System with a High Voltage Transfer Ratio

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

Design and Demonstration of a 100 kW High-Frequency Matrix Core Transformer for More Electric Aircraft Power Distribution

Design Optimization Methodology for Planar Transformers for More Electric Aircraft

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

Optimization of a 6.78-MHz Inductive Power Transfer System for Unmanned Aerial Vehicles

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer

Optimum Magnetic Circuit Configurations for Permanent Magnet Aerospace Generators

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Power Packaging Design Considerations for High Frequency High Voltage Generator

A Strong Misalignment-Tolerance Wireless Power Transfer System Based on Dynamic Diffusion Magnetic Field for Unmanned Aerial Vehicle Applications

Design of High-power Density and High-frequency Transformers for Auxiliary Power Supply System in Electric Multiple Units

Design method for high-power high-frequency magnetic-resonance air-core transformer

Magnetic Design of a 4.16 Kv/1 MW Medium Voltage PV Plus Storage Solid State Transformer (PVS-SST)

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers