Abstract:A fully integrated Phase-Locked Loop (PLL) based transmitter and I/Q Local Oscillating (LO) signal generator used for half-duplex Wireless Sensor Networks (WSN) transceivers is proposed. Instead of one 430–435 MHz PLL for frequency synthesizing, a 1.72–1.74 GHz PLL is designed together with a 1/4 frequency divider. Then the chip area of the inductors in the Voltage-Controlled Oscillator (VCO) is decreased to about 1/16, and I/Q dual-path LO signals can be obtained without additional power consumption. A Gray-code controlled prescaler is proposed to avoid the glitches and uncertain states, and then the frequency dividing accuracy is improved by 17%. A Gauss Frequency Shift Keying (GFSK) transmitter with a pipeline modulator is proposed, the 1st and 2nd Adjacent Channel Power Ratio (ACPR) are −19.9 and −20.7 dBc, respectively. A mathematical spur model of 1/4 frequency dividers is built here, and then a low-spur 1/4 frequency divider composed of our proposed improved Current Mode Logic (CML) latches is designed. The testing results show that the reference spurs are −61.2 dBc@20 MHz and −57.7 dBc@40 MHz at the output of the PLL, and −70.5 dBc@20 MHz and −66.6 dBc@40 MHz at the output of our 1/4 divider. With 2.6-mW power consumption, our proposed 1/4 frequency divider has a phase-noise contribution of only 0.5 dBc/Hz@500 kHz and 0.2 dBc/Hz@1 MHz.

Spur Minimization Techniques for Ultra-Low-Power Injection-Locked Transmitters

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

A Low Jitter, Low Spur Multiphase Phase-Locked Loop for an Ir-Uwb Receiver

An 11 pJ/Bit Multichannel OOK/FSK/QPSK Transmitter With Multi-Phase Injection-Locking and Frequency Multiplication Techniques

A Low Power All-Digital PLL with −40dbc In-Band Fractional Spur Suppression for NB-IoT Applications

A Low Power All-Digital PLL With −40dBc In-Band Fractional Spur Suppression for NB-IoT Applications

0.2Mw 70Fsrms-Jitter Injection-Locked PLL Using De-Sensitized SSPD-Based Injecting-Time Self-Alignment Achieving -270Db FoM and -66Dbc Reference Spur

A Sub-100 $\mu$ W MICS/ISM Band Transmitter Based on Injection-Locking and Frequency Multiplication

A 13.5-to-28.8ghz 72.3%-Locking Range Multi-Phase Injection-Locked Frequency Tripler with Improved Output Power and Wideband Subharmonic-Spur Rejection in 28nm CMOS

A 0.98mw Fractional-N ADPLL Using 10b Isolated Constant-Slope DTC with FOM of −246db for IoT Applications in 65nm CMOS

A Low-Power Low-Noise mm-Wave Subsampling PLL Using Dual-Step-Mixing ILFD and Tail-Coupling Quadrature Injection-Locked Oscillator for IEEE 802.11ad

An Ultra-Low-Power Injection Locked Transmitter for Wireless Sensor Networks

A PLL based WSN transmitter and I/Q LO signal generator at 430–435 MHz

A Sub-mW Fractional-<inline-formula> &Lt;tex-Math Notation="latex">${n}$ &Lt;/tex-Math> &Lt;/inline-Formula> ADPLL with FOM of −246 Db for IoT Applications

Hybrid Phase-Locked Loop with Fast Locking Time and Low Spur in a 0.18-Μm CMOS Process

A 0.2-to-39.2ghz 66.2-Fs Jitter and −71.3dbc Spur Sub-Sampling PLL Using DAC-Based Constant Control Voltage Compensator and Quad-Mode 2nd Harmonic Filtering Oscillator

A 0.8-V, 2.55-Ghz, 2.62-Mw Charge-Pump PLL with High Spectrum Purity

A 2.1-GHz PLL with -80dBc/-74dBc reference spur based on aperture-phase detector and phase-to-analog converter